资源列表
SW_NUC505_80mm_Thermal_Printer_V1.0
- his solution is an 80mm thermal printer printer that employs IPI 800932 print heads and an automatic paper cutter. This printer has a wide range of applications and can be used to print various receipts and invoices for POS systems, cashiers, and
28335-C-B-P-PMSM-FOC-QEP_V0.1.6
- 实现永磁同步电机基于旋变的控制 FOC算法 有电压欠压保护，IGBT故障保护，过流，过压等保护(Control of permanent magnet synchronous motor based on rotation FOC algorithm There are voltage undervoltage protection, IGBT fault protection, over-current, overvoltage protection)
89c
- POCSAG编码，使用Ｃ语言编写，详细标注各子程序的用途(Pocsag Code POCSAG encoding, the use of C language, detailed tagging of the use of subroutines)
12864液晶驱动
- 12864液晶驱动，四线串口，含字库驱动，可以直接编译使用。(12864 LCD driver, four wire serial port, including font drive, you can directly compile the use of.)
proteus中51单片机控制交通灯的仿真及论文
- proteus中51单片机控制交通灯的仿真及论文,包括proteus仿真和keil代码，以及全部报告(Proteus 51 singlechip traffic lights control simulation and papers, including proteus simulation and keil code, and all reports)
外部中断实验
- 通过开发板上载有的3个按钮（KEY_UP、KEY0、KEY1），来控制板上的2，LED（DS0和DS1），其中KEY0控制DS0，按一次亮，再按一次，就灭。KEY1控制DS1，效果同KEY0。KEY_UP则同时控制 DS0和DS1，按一次，他们的状态就翻转一次。(Some 3 buttons are uploaded through the development board (KEY_UP, KEY0) (KEY1) to control the 2 LED (DS0 and DS1) on
(1527解码)中断法
- ev1527 无线解码,stc单片机解码程序，软件实现(EV1527 wireless decoding)
跑马灯
- 用51单片机实现对使用LPD6803芯片的LED灯带进行控制，实现跑马灯。(With 51 MCU control with the LED lamp using LPD6803 chip, to achieve marquee.)
心率传感器
- 在编译器Keil中利用C语言编写的检测心率的程序(In the compiler Keil, use C language to write the test heart rate program)
上位机串口通讯
- 自己写的比较完整的上位机串口助手，可以跟下位机建立通讯，并接发数据(Write your own complete PC serial assistant, can establish communication with the lower machine, and sending and receiving data)
5Kg电子秤程序（LCD1602显示）推荐使用
- 利用hx711设计的电子秤程序，采用STC89c52控制，支持1602显示数据(Electronic scale program designed by hx711)
i2s_tx
- i2s发送模块，双声道发送数据，适用于i2s左对齐模式(I2S send module, double channel send data, apply to I2S left aligned mode)