资源列表
DSP的噪声处理程序
- dsp处理噪声分析，noise-adc+dac+uart
称重压力传感器HX711AD模块电路+程序
- 称重压力传感器HX711AD模块电路+程序(Weighing pressure sensor HX711AD module circuit + program)
Desktop2
- C语言写的时钟配置程序，MSP430F5529适用(limianbaohanyigeVHDLxiede)
7705&89C52
- 基于89C51 + AD7705串口输出的源代码(Source code based on 89C51 + AD7705 serial port output)
1、ZY10A 跟随单独程序-PWM调速
- 基于89C51的智能小车的路径跟踪系统，c语言为编译语言。(The path tracking system of the intelligent car based on 89C51, and the C language as the compiler language.)
【C51】温度传感器DS18B20 PROTEUS仿真+源程序1
- 【C51】温度传感器DS18B20 PROTEUS仿真+源程序((C51) temperature sensor DS18B20 PROTEUS simulation + source program)
按键长按短按
- 识别按键是长按还是短按，运用在项目中能省下好多IO口(Identification of keys is long or short pressed, and many IO ports can be saved in the project.)
点菜机
- 可在屏幕菜单上选择点菜，通过射频传到上位机。(You can choose a menu on the screen menu and send it to the upper computer by radio frequency.)
OLEDSTM32
- OLED STM32 驱动显示方法 8080通信，MDK文件系统，图片字符的显示设置与驱动
STM32 led测试流水灯程序
- 这是一个基于STM32F103C8T6 的LED流水灯程序。大家可以试用 一下。(This is a STM32F103C8T6 based LED pipelining light program. You can try it out.)
成品
- 本文件为风力摆控制系统源代码，适用于stm32f103zet6开发板，具体硬件与IO口的连接需要根据自己的机械结构来调整，PID参数也需自行调整，传感器采用MPU9150加速度传感器（陀螺仪）(This document is suitable for stm32f103zet6 development board. The connection between specific hardware and IO port needs to be adjusted according to its
MS5803
- 根据数据手册写的MS5803压力传感器的程序，因为我是看原子的资料学的STM32，所以有他的system文件夹(According to the MS5803 pressure sensor program written in the data handbook, because I'm a STM32 for atomic data, so I have his system folder.)