资源列表
MultiKeyScan
- 多个按键独立检测 单击 双击 长按等操作 具有消抖功能(Multiple keys are independently detected, click double click, long click, and so on.)
PWM
- 芯片型号 dspic33fj16GS502 。四通道8路pwm，占空比相移可调。(Four channel 8 way PWM, duty cycle and phase shift is adjustable .)
2808CAN的收发实验利用中断
- 2808CAN收发实验中断，在硬件上调试成功
u-boot-2018.01
- u-boot-2018.01，最新的uboot源代码，整合了诸多芯片，直接可以使用来移植，编译
STM32F4 ADC+USART
- 利用STM32F4芯片完成单路AD采样及串口发送(Using STM32F4 chip to complete single channel AD sampling and serial port sending)
NUC029FAE_BSP_CMSIS_V3.00.000
- nuc029单片机串口、iic、pwm等相关历程。(Nuc029 microcontroller serial port, IIC, PWM and other related processes.)
BMU-001
- 实现电池电压的采集、温度、电流 ISL94203 Eeprom(Achieving battery voltage acquisition, temperature and current ISL94203 Eeprom)
PMC设计与编程
- FANUC pmc 设计与编程手册，适合初学者学习。(FANUC pmc design and programing manual.)
FSR薄膜压力传感器资料包v4.0
- 薄膜压力传感器电路图，通过单片机采集压力值；(Thin film pressure sensor circuit diagram, collecting pressure value.)
病房呼叫系统设计
- 可以实现16张病床的同时呼叫，呼叫后蜂鸣器响，由两位数码管显示呼叫房号，且按病房呼叫先后顺序显示呼叫病房号，由4*4矩阵键盘代替呼叫按键，另有4*4矩阵应答按键，按下相应病房房号的应答按键后，数码管将不再显示相应病房号，无病房呼叫后蜂鸣器停止响声----------里边有仿真和程序，已调试成功（在其他大佬处获得修改后所得，请勿用于商业，谢谢）(It can call 16 beds at the same time, buzzer rings after calling, two digital
HX8347i 2.8 inch LCD TFT Display
- HX8347i 2.8 inch LCD TFT Display driver and Arduino example
mqtt
- 可以用于连接阿里云物联网平台，只需要在头文件中将参数修改成自己的参数就能用了(It can be used to connect to the Aliyun Internet of Things platform by simply modifying the parameters to your own in the header file)