资源列表
stc89c51
- STC89C51是一种性价比很高的芯片,本篇文章提供了很详细的说明,对单片机开发着很有用.-STC89C51 is a highly cost-effective chip, this report provides a very detailed descr iption, right MCU Development to be useful.
MSP430_i2c
- 用C写的I2C总线EEPROM读写程序,在MSP430+AT24C64~512平台上验证通过。对其他处理器只需简单修改即可使用。-C write I2C EEPROM read and write procedures, the AT24C64 MSP430 + ~ 512 platform validation through. The only other processor can use a simple amendment.
debussy_v5_labs
- debussy中文使用手册,可以追踪源代码调试,验证的必要工具,只要解压缩即可-Chinese user manual tracking source code debugging, verification of the necessary tools decompression can be as long as
Modbus_test1
- 用于C51上的modbus协议,经测试可运行,但还不完善-C51 for the Modbus protocol, the tests will be run, but still not perfect
MCP2510DemoSource
- pic单片机驱动mcp2510源代码,采用picc编译器-pic Microprocessor mcp2510 source code, compilers used picc
SinWaveByPWM
- 利用PWM产生高精度正弦波,从PWM引脚输出的脉冲信号经过简单的低通滤波后,可以得到平滑的正弦波,波的频率可以微调-produced using high-precision sine wave PWM, PWM output pin from the pulse signal through simple low-pass filter, can be smooth sine wave, the wave frequency can be fine-tuned
progisp15
- usb编程器的全部资料,包括上位机程序及下位机源程序 支持编程器类型 1,多种并口(可以自定义)编程器(并口串行) 2,USBPROG编程器(usb串行) 3,并口并行编程器 4,usbasp 扩展功能 1,串口调试,超级终端 特色: 1,速度较快(16k程序): 并口 读11秒 写11秒;USBPROG读2秒 写2秒。 2,USBPROG根据目标cpu自动调整三种下载速度(8k,187.5k,375k) 3,支持自定义ATMEL全系
aduc812
- Keil C51编写的Aduc812的完整代码,适合学习使用Aduc812单片机进行AD_da处理 -Keil C51 prepared by the Precise code of integrity, Precise suitable for learning to use the MCU for handling AD_da
Key_8279
- keil c51开发的8279和51单片机通用键盘控制和Led显示及uart通信程序。-Keil decoder developed by 8279 and 51 general-purpose keyboard control and Led Display and uar t Communication Program.
hm612C
- 一个不错的硬盘播放器程序,包含VFD显示程序,红外线遥控程序,硬盘读写程序,及解码程序等.-a good hard disk player procedures, including procedures VFD, infrared remote control procedures, hard drive read and write procedures and decoding procedures.
ICD2.5(18F4550+16F877)
- ICD 2.5(18F4550+16F877)最全的资料!-ICD 2.5 (18F4550 16F877) the most complete information!
3.21
- 51单片机控制两路步进电机,实现各种工作方式及其转换-51 MCU control two stepper motor road to achieve various methods of work and its conversion