资源列表
12864LCD
- 12864液晶protues仿真，可以显示图片-12864 LCD protues simulation, you can display pictures
SN8P2711-C
- 采用松翰单片机编写的C语言格式的程序，希望对各位有所帮助。-Sonix MCU using the C language format prepared by the procedure you want to help.
RS232-RS485-communication
- 基于单片机的RS232/RS485通信（串口通信）内附datasheet-相关芯片手册及串口电路图-Microcontroller-based RS232 communication (serial communication)
Capture
- dsPIC30f6014单片机的脉冲捕捉程序-pulse capture program of dsPIC30f6014 microprocessor
usb转串口线 驱动 PL2303
- 这个是usb转串口的驱动，其转换芯片是pl2303，所以，凡是这种转换芯片做的转换器都可以使用这个驱动，——基于windows32的！方便用于stc单片机的串口下载，这个也是stc官方支持的usb转串口驱动！方便大家共享！-a usefull driver for PL2303,a kind of usb to serial convertor!
STM8S103F2
- STM8S103F2，最低端的STM8S系列芯片。相信在很多简单控制的场合会应用到。-STM8S103F2, STM8S most low-end chips. I believe that many simple control applications will be applied to.
ILI9341_BOE2.4
- 有关TFT液晶驱动ILI9341的驱动例程，可移植于任何单片机和ARM系统。-For TFT LCD driver ILI9341 driver routines can be ported to any microcontroller and ARM systems.
STC12C5620AD_ID_CARD_READ
- 基于125khz id卡的读卡c程序manchester编码方式：0为10 1为01，如果与其相反则需要做相应的修改。 适用于125KHz非接触式ID卡，EM4100兼容格式ID卡(64bits, Manchester编码) MCU：stc12c54xx crystal:11.0592M-A 125KHZ ID CARD READ C PROGRAM
RS485
- 单片机上电后向串口数据0XAA，接收到数据后，然后向串口发送接收到的数据使初学者领略使用中断进行数据通信，传输方式为RS485-Power single-chip serial data to the 0XAA, receive data, and then sent to the serial data received interrupt beginners enjoy the use of data communications, transmission for RS485
alarmvoice
- pic单片机控制蜂鸣器发出警报声，用c语言写的，proteus仿真通过-pic microprocessor controlled alarm buzzer sound, written with the c language, proteus simulation by
mimashuo
- 89C52单片机实现密码锁的功能。里面附有原理图和源代码-89C52 MCU lock function. Inside with a schematic and source code
AD0809-C-chengxu
- AD590成功C程序加protues图，希望对大家有用-AD590 successfully added protues Figure C program