资源列表
yinpin
- 这是一个音乐闪光及频谱指示简易系统的源程序，控制器设计采以STC89C51为核心，基于Keil单片机模拟调试。-This is a music system, flash and simple instructions of the source spectrum, the controller design was used to STC89C51 as the core, based on Keil MCU simulation debugging.
mpt1343
- MPT1343 标准文档 按时到岗f asdg-MPT1343 standard documentation on time for duty f asdg
UAV-ba
- C_OS的无人机数据采集系统UAV-based data acquisition system _C_OS_-UAV-based data acquisition system _C_OS_
PO2290_BIOS
- LPC2294 BIOS 2294加载程序的代码,可通过网口USB口下载更新程序-LPC2294 BIOS CODE
0001112
- 松翰 eeprom 读写 程序 用于读写24C02 24C04-SN 8P2700 ASM
002221
- 松翰运算程序 单字节加 减 乘 除 二字节加 减 乘 除-Operational procedures for single-byte Sonix two bytes Math Math
ATM-DATAFLASH-CH(2009-12-25)
- 智能锂电池的很好的内部资料，只得到家学习和参考-Internal lithium battery good intelligence information, home study and reference only
bq2060-config-EEPROM-slva149
- 智能锂电池的很好的内部资料，值得大家学习和参考-Internal lithium battery good intelligence information, worth learning and reference
qudong
- 51单片机控制单个舵机程序 P10口为舵机信号线，基本周期为20ms，本程序高电平为2ms,低电平为18ms,若想实现其他转角只须改变定时器初值就行-51 SCM control program P10 population of a single steering servo signal line, the basic cycle is 20ms, this program high as 2ms, low as 18ms, if you want to achieve the othe
DAC7714
- D/A 芯片DAC7714驱动程序，输出电压+-10V,12bit-D/A chip DAC7714 driver, output voltage+-10V, 12bit
ADC0
- 本程序是C8051f340中ADC0的所有启动方式，及其工作方式，单端，双端，参考电压的设置，及其转化到数码管显示。-This program is C8051f340 all started in the ADC0 way, and work, single-ended, double-end, the reference voltage setting, and its transformation to a digital display.
MAIN
- 定时插座，通过设置好标准时间后，可任意设定开关时间-control on and off timer