资源列表
MSP430-Timer_A
- 使用MSP430单片机实现用Timer_A捕获方式显示信号的频率与周期，程序已成功运行。-Use MSP430 MCU Timer_A capture frequency cycle of the signal, the program has been run successfully.
nrf2401_temp_sender
- NRF2401温度采集、无线发射，51单片机C程序。-NRF2401 temperature acquisition, wireless transmitter, 51 microcontroller C program.
oled
- STM3F103RBT6 OLED底层驱动函数，用在不同的硬件上请适当的修改对应的GPIO口 字符取模说明： 12*6 字高12字宽6 ： 对应中文字符 12*12 字高12字宽12 16*8 字高16字宽8 ： 对应中文字符 16*16 字高16字宽16-STM3F103RBT6 OLED the underlying driver functions, with appropriate modifications corresponding to different
test_oled
- oled分级菜单，亲测可用。基于stm32单片机-oled hierarchical menus, pro-test available.
TTouch
- PIC16F727触摸键盘程序，可实现16个独立触摸按键，带滤波，单片机触摸键盘程序-PIC16F727 touch keyboard program can achieve 16 independent touch button, with filtering, MCU touch keyboard program
AX220xx_Uart-Wifi_fm__Src
- 使用ASIX的AX220XX系列WIFI芯片做的WIFI-UART模块固件程序，方便嵌入式设备联网-Use the ASIX the AX220XX series WIFI WIFI-UART chip to do the module firmware, convenient embedded device networking
315-433M
- 315MHZ--433MHZ无线编码发射模块解码程序。 PT2262/2264震荡电阻在1M-10M自适应解码。-315MHZ- 433MHZ wireless coded transmitter module decoding process. PT2262/2264 shock resistance 1M-10M adaptive decoding.
MSP430_PWM_timera0
- MSP430F149利用PWM模拟呼吸灯。-MSP430F149（TI_MCU） : Use timer for output LED.
motor
- 初始化PWM定时器0,按键及参数配置,步进电机运行模式控制等-Initialize PWM timer 0, keys and parameter configuration, the stepper motor running mode control
sht10-stm32
- 温湿度传感器SHT10在STM32下的驱动，已调试通过。-Temperature and humidity sensor SHT10 driving under the STM32 debug through.
mc96f6432_sample_code
- 现代单片机mc96f6432例程代码,用于现代单片机mc96f6432开发应用。-abov mcu(MC96F6432) sample code
RGB---san--ji-se-LED-bianse-chengxu
- 本程序用于控制RGB三基色 LED ，使其按红，绿，蓝，紫，黄，青，白顺序渐变 每种颜色的渐变时间为9.3ms. -This procedure is used to control RGB three-color LED to red, green, blue, purple, yellow, green, white sequence gradient For each color of the gradient time of 9.3ms.