资源列表
pwm
- LPC936分别用定时器T1和CCU产生PWM波的keil工程及源代码-The LPC936 respectively timer T1 and CCU the PWM wave keil project and source code
cesu
- 基于AT89C51单片机，使用HY-SRF05超声波模块设计的测距程序-HY-SRF05 ultrasonic ranging module design procedures based on AT89C51 microcontroller
measured-frequency-meter
- 51单片机 测频计 自己做的 可测1M赫兹一下的方波 可能不是很好 有很多不好的地方 往海涵 自己敲的代码 新手-The 51 MCU measured frequency meter
DAC-experiment
- 单片机开发板，本实验将实现如下功能：利用按键（或USMART）控制STM32内部DAC模块的通道1来输出电压，通过ADC1的通道1采集DAC的输出电压，在LCD模块上面显示ADC获取到的电压值以及DAC的设定输出电压值等信息。同时可以通过usmart调用Dac1_Set_Vol函数，来直接设置DAC输出电压。-This experiment will achieve the following functions: use of keys (or USmart) channel control
DALI
- 以前学习DALI时所下载的一些资料。内容较全。-Learning DALI download some information. Content than the whole.
MPC5553_MPC5554_RM
- PowerPc MPC 5554 开发手册-PowerPc MPC 5554 development datasheet
NRF24L01(recievetosend)
- NRF24L01发送跟接受模式互切换，实现两个NRF24L01之间的互相通信，此为接受模式变换为发送模式。-With acceptance model NRF24L01 send each other switch, to achieve interaction between two NRF24L01 of communication, this is the accepted mode conversion transmit mode.
dds_c51
- AD9958利用51单片机控制程序！双通道工作模式！-AD9958 programme using 51 MCU
eeprom
- AT89C52单片机，红外自学习按键实验代码！-AT89C52, infrared key experimental self-learning code!
modbus-and-freemodbus
- MODBUS协议及freemodbus的实现源码。适合应用于单片机/arm与触摸屏或者其他工控设备的通讯（绝大多数触摸屏都支持modbus协议）。-MODBUS protocol, and Source of the freemodbus. modbus is excellent for communication between the microcontroller/arm and touch screen.(most touch screen support modbus protoc
TFT_Drive-for-51
- 51单片机直接驱动TFT屏，控制TFT实现汉字，字符显示，和画点功能。-51 MCU directly drive TFT screen, the control TFT achieve kanji character display, and draw points.
ESC-initialization
- 电调初始化程序 不是用遥控器，而是用pmw直接控制-ESC initialization not by remote control, but with pmw direct control