资源列表
HX8352-C-driver-(stm32f103)
- LCD驱动芯片HX8352-C的底层驱动程序，很方便的移植到别人单片机上，此驱动为8位LCD-LCD driver chip HX8352- C the underlying driver, very convenient to transfer others on single chip microcomputer, this drive for 8-bit LCD
STM32-ST-LINK-utility
- ST-LINNK/V2集成使用软件，含驱动，可驱动升级，是开发ST 8位单片机和32单片机的仿真驱动软件，可烧写。-ST-LINNK/V2 integrated use of software, including drivers, can be driven to upgrade, is the development of ST 8-bit microcontroller and 32 single-chip simulation driver software can be program
STC15_TEST
- STC系列单片机库函数与测试例程，包含ADC转换，串口，PWM，定时器，数码管等40多个程序-STC Series MCU library functions and test routines, including more than 40 program ADC conversion, serial port, PWM, timers, digital control, etc.
485-test
- 基于STM32F103ZE的485测试程序-Based on the 485 test program STM32F103ZE
AD8232-heart-rate-monitor
- AD8232心率监测传感器原理图和PCB源文件-AD8232 heart rate monitor sensor schematics and PCB source files
measuring-battery-power
- 基于STM32简易地根据电池开路电压测量锂电池电量的工程文件-Project of measuring Lithium battery power according to the voltage
hx711
- 嵌入式系统STM32对24位AD hx711的驱动程序，语言采用C语言-Embedded System STM32 on 24 AD hx711 driver, the language used in C language
stm32-Watering-machine
- STM32 自动浇花机，有1602液晶屏显示 RTC 湿度检测。-STM32 automatic watering machine, a 1602 LCD screen display RTC humidity detection.
16X16
- 讲述了16x16点阵屏的驱动电路以及控制程序。-Describes the 16x16 dot matrix screen driver circuit and control procedures.
PMS1003
- PM2.5传感器PMS1003例程，采用STM8作为主控制器，SSD1306作为液晶控制器，液晶型号为EDS812-PM2.5 sensor PMS1003 routines using STM8 as the main controller, SSD1306 as LCD controller, LCD model EDS812
35-STM32_97F
- 关于以太网网卡的MDIO的寄存器读写，模拟的时序方式，已经测过，可以放心使用-Ethernet network card on the MDIO register read and write, analog timing, has been tested, you can rest assured that the use of
x893-CNC-STM32-cafc55d
- CNC-STM32 - 基于STM32的CNC控制器源代码， 这是一个老外的开源的CNC控制器，-CNC-STM32- STM32 based CNC controller Skip to content Please note that GitHub will soon be dropping support for Internet Explorer 10.