资源列表
MINISTM32-RFID
- 基于STM32mini驱动RC522的源程序-Based on STM32mini drive RC522 source
lcd_bh1750
- 通过bh1750采集环境光照度，并在野火stm32mini板子的屏幕上显示。-The ambient light is collected by the bh1750 and is displayed on the screen of the wildfire stm32mini board.
dps
- 数字移相，STM32单片机，采用ad采集信号经处理后da输出-Digital phase shift, STM32 microcontroller, using ad to collect the signal after processing da output
LightCubeContainsDetailedNotes
- 8*8*8的光立方源码，运行于STM32上，效果很好看，实现了对应不同的功能，在源码里面有注释解释功能的实现。-8*8*8 light cube source, running on the STM32, the effect is very good, to achieve the corresponding different functions, the source code, there are notes to explain the realization of the funct
SHT11_Init_collect(C51)
- SHT11温度和湿度初始化和采集程序源码，在C51做微控制器编写，可以移植到STM32单片机。-Initialization and SHT11 temperature and humidity acquisition program source code, in C51 microcontroller, can be transplanted to the STM32 microcontroller.
AT8307
- AT8307驱动程序，通用GPIO模拟I2C时序-AT8307 Driver
ATK-S1216-GPS
- STM32 ATK-S1216 GPS+北斗定位模块-STM32 ATK-S1216 GPS+ Beidou positioning module
88f54TouchKey
- PWM0输出500K方波信号 采集按键数据变化 根据按键数据量变化范围确定是否有按键，PWM输出500KHZ方波信号 对电容进行充放电，当手指触摸到金属件 电容参数发生变化，从而电压发生变化，利用AD功能检测变化量，就知道有按键 触摸按键有电阻和电容之分-PWM0 output 500 k square wave signal acquisition button data changes According to the key data volume range to determi
Remote_v01
- 遥控发射代码，2个按键，用于发ASK发射，类拟EV1527，用C语言编写-Remote launch code, 2 keys for ASK launch, class analog EV1527, written in C language
Infrared-reception-and-emission
- 用51单片机模拟红外发送和接收解码的过程，软件实现红外发送，接收端实现红外数据解码，并用数码管显示出来，主要是对红外PWM(脉冲宽度调制) 和PPM(脉冲位置调制) 两种形式编码的研究-Simulation of infrared transmission with 51 single-chip microcomputer and the decoding process, software realization of infrared transmission, infrared recei
stm32-DHT11
- STM32连接DHT11串口发送温湿度.-STM32 DHT11
LiquidCrystal_I2C1602V1
- 使用STM32的IIC驱动液晶屏1602-use stm32 s iic to drive lcd1602