资源列表
ADC
- 1路AD单次采集(采用串口调试助手显示) 用串口调试助手向单片机发送AD命令,单片机 接收到命令后将读取ADC0的电压值返回给计算 机在串口调试助手上显示.-1 channel AD single acquisition (using serial debugging assistant display) AD send commands to the microcontroller using serial debugging assistant, SCM After
MSP430F14IPC-2014
- 本程序是MSP430F149单片机下的LCD12864、AD采样及PWM结合的综合应用-This program is under the MSP430F149 MCU LCD12864, AD sampling and PWM combined with comprehensive application
STM32L_ModeCode
- STM32L151(ADC+USB).Very short lightning impulse measuring.
DS1722
- 基于msp430和DS1722的温度检测，通过三线接口连接，DI和DO连在一起作为IO，SERMODE接地使用三线接口模式。-Temperature detector based on MSP430 and DS1722 , connected by three wire interface, DI and DO tie together as IO, SERMODE connect to ground using three wire interface mode.
MAX262_1
- 基于STM32的程控滤波器（MAX262）源码-Based on the STM32 programmable filter (MAX262) Source
xx
- 嵌入式实时操作系统uc/osii原理与应用 任哲 书本例子源代码 下载-Embedded real-time operating system and application of the principle of uc/osii Ren Zhe book example source code download
encoder
- 基于stm32的IE2-512光电编码器初始化及计数功能，在智能车运动时可实现测距，测速，并通过PID进行反馈-Based IE2-512 photoelectric encoder initialization and counting functions stm32 in motion can be achieved when the smart car distance, speed, and through PID feedback
ADS1x9x_MSP_SourceCode
- 包含ads1*9*和msp430这一类心电采集芯片的所有代码函数（所有代码都是基于msp430单片机开发的）-Contains ads1*9* and msp430 this kind of ecg acquisition chip all the code functions (all code was developed based on msp430 single chip microcomputer)
ILI9486_R61529_drv
- LCM ILI9486 & R61529 drv
spi-adxl375
- 利用stm32的SPI通讯驱动adxl375加速度计，使用keil5编程，已经完全可用，只是还没有进行数值转化而已。在网上找了很多资料，利用SPI的很少。-stm32 SPI adxl375
modbu-slave-station
- 使用stm32F407芯片做 modbus从站-stm32F407 modbus used to be slave station
msp430F449
- msp430F449开发板源代码 包含从led到同步异步的所有程序 Msp430F449 development board source code from the led to synchronous asynchronous include all the procedures-msp430F449 development board source code contains all the programs from led to synchronize asynchronous