资源列表
ring1.1
- 微电脑自动打铃器程序含电路原理图,可实现定时自动打铃-Auto-play Ling microcomputer program with circuit diagram
LCD_DISPLAY_CODE
- LCD Disp code/ARM PROCESSER 1602 LCD -LCD Disp code/ARM PROCESSER 1602 LCD
include
- 用4×4组成0-9数字键及确认键。 用8位数码管组成显示电路提示信息,当输入密码时,只显示“8.”,当密码位数输入完毕按下确认键时,对输入的密码与设定的密码进行比较,若密码正确,则门开,此处用LED发光二极管亮一秒钟做为提示,同时发出“叮咚”声;若密码不正确,禁止按键输入3秒,同时发出“嘀、嘀”报警声;若在3秒之内仍有按键按下,则禁止按键输入3秒被重新禁 -4 × 4 form with the number keys 0-9 and confirmation button. With
include
- 可设定功率和驱动时间并在数码管上显示驱动时间倒计时的LED驱动程序-Can be set to power and drive time and in the digital tube LED display driver time in the countdown to the driver
1602_8051F
- 可驱动1602,实现字符、标号显示,程序已经过验证,适合单片机使用者使用。-1602 can be driven to achieve character, label display, the program has been verified, suitable for microcomputer users.
DA
- 可实现DA转换,程序简单易懂,并且已经过编译,完全适合单片机初学者使用,-AD conversion can be realized, the program simple and easy to understand, and have been compiled, perfectly suited to microcontroller for beginners to use,
jianpan
- 可实现单片机与键盘之间的通信,程序已经过编译,适合单片机初学者使用。-Enables communication between the MCU and the keyboard, the program has been compiled for the use of microcontrollers for beginners.
include
- 用DS18B20做数字温度计测温,并在数码管上显示-DS18B20 to do with the digital thermometer temperature and displayed in the digital control
chuankou
- 本程序可以实现单片机串口与外设之间的通信,程序已经过编译,适合51系列单片机。-This procedure can be achieved with the peripheral microcontroller serial communication between the program has been compiled for 51 series microcontroller.
T0shuchupwm
- 用AT89S52的T0一个定时器控制同时输出四路不同占空比的PWM波形。-AT89S52 of T0 with a timer control at the same time four different duty cycle PWM output waveform.
DataRet
- 本程序可实现ARM开发板里面的UART0接收上位机发送的数据,程序已经过调试,完全适用。-This procedure can be realized inside the ARM development board UART0 receive data sent by host computer, the program has been debugging, fully applicable.
modem
- 本程序是使用ARM的UART1的Modem接口功能,实现Modem与远程主机进行通信。-This procedure is to use the ARM-UART1 of the Modem interface functions to achieve Modem to communicate with the remote host.