资源列表
TX-1C
- 本程序为实验板的总体测试程序，综合测试了整个实验板上的绝大多数功能,下载程序后会依次看到以下5种状态。 1.8个流水灯先会从上到下流动一遍，同时蜂鸣器发声。 2.接着DAC电流指示灯由暗变亮 3.接着前三位数码管显示温度值 4.接着AD数值显示在数码管的前三位 5.接着等待矩阵键盘的按下，按下后相应的数码显示在数码管的后三位上-This procedure for the experiment board' s overall test program, a compr
Fourth_Freescale_Cup_Smart_Car_Competition_program
- 本程序为我们参加第四届飞思卡尔全国大学生智能汽车竞赛的源代码,较好的解决了路径识别的问题. 开发环境:CodeWarrior 4.5 芯片:mc912dg128-This procedure for us to participate in the Fourth National University Freescale Smart car racing' s source code, the better solution of the path identify the problem
2009_National_Electronic_Design_Competition_B_titl
- 此为2009年全国电子设计大赛B题控制台程序,无线遥控控制移动平台的动作.开发环境:CodeWarrior 4.5 芯片:mc9s12dg128-This is the 2009 National Electronic Design Contest B title console program, wireless remote control the mobile platform action. Development environments: CodeWarrior 4.5 Chip:
2009_National_Electronic_Design_Competition_B_titl
- 此为2009年全国电子设计大赛B题移动平台程序,可以控制平台直走,左右直角转弯,停止等. 开发环境:CodeWarrior 4.5 芯片:mc9s12dg128-This is the 2009 national title Electronic Design Contest B mobile platform program, you can control the platform, go straight, left and right angle turns, stop and so o
freescale-ep100-ECT-timer-over-interrupt
- freescale ep100 ECT定时中断程序-freescale ep100 ECT timer interrupt program
freescale-ep100-PWM-programmer
- freescale ep100 PWM 程序，按程序中代码初始化即可启动使用PWM，代码已经经过调试。-freescale ep100 PWM process, according to the procedure in the initialization code to activate the use of PWM, the code had already been debugging.
freescale-ep100-ECT-capture-interrupt
- freescale ep100 ECT捕捉中断程序，按程序中代码初始化即可启动使用捕捉中断，代码已经经过调试。-freescale ep100 ECT capture interrupt program, according to the procedure in the initialization code to activate the use of capture interrupt, the code had already been debugging.
freescale-ep100-ADC-programmer
- freescale ADC 程序，按程序中代码初始化即可启动使用ADC，代码已经经过调试。-freescale ADC program, according to the procedure in the initialization code to activate the use of ADC, the code had already been debugging.
freescale-ep100-CAN-programmer
- freescale ep100 CAN 程序，按程序中代码初始化即可启动使用CAN，代码已经经过调试。-freescale ep100 CAN program, according to the procedure in the initialization code to activate the use of CAN, the code had already been debugging.
MC9S12XEP100RMV1
- freescale EP100 芯片说明文档-freescale EP100 chip documentation
FreescaleEp100CANProgrammer
- freescale ep100CAN程序，代码已经经过调试。-freescale ep100CAN program, the code had already been debugging.
freescale-Ep100ECT-capture-interrupt
- freescale ect 捕获中断程序，程序已经经过调试，成功。-freescale ect capture interrupt program, the program had already been debugging and successfully.