资源列表
OV2640_stm32f4_2_1_SVGA_double
- 这个是我自己写的用stm32f407 DMA双缓冲模式读取ov2640 摄像头（不带FIFO）SVGA格式图片的程序，并以串口的形式发送到上位机，帧率只能达到7-This is what I wrote it myself with stm32f407 DMA double buffering mode reading ov2640 camera (without FIFO) SVGA image format program, and send the form to the PC seria
two_d_idct_final
- 反离散余弦变换，可以正确实现功能，通过了功能仿真-Inverse discrete cosine transform
51
- 51增强型单片机C8051F340的资料 主要是sd卡和以太网 usb的-51 Enhanced MCU C8051F340 information mainly on the sd card and ethernet usb
ARM_GSM_OK
- STM32和无线模块TC35实现通信，实现接受和发送短信-STM32 and TC35 wireless module for communication, to receive and send text messages to achieve
vga_geometry_xps92i_s3_v01_00_03
- Here an embedded System-on-Chip is build, in an Xilinx Spartan-3 FPGA with Microblaze as the processor.A PLB core System is made with the VGA IP core attached to it. The software written for the MicroBlaze processor specifies the object, the color an
Ultrasonic-ranging-program
- 基于51单片机超声波测距，含PCB，文档，程序-Based on 51 single-chip ultrasonic ranging, including the PCB, documents, programs
CAN收发实验
- 实现can发送及中断读取 a11 a12引脚为can引脚(To achieve the can send and interrupt read a11, A12 pin for the can pin)
SDK 5.0.2.1
- da14580SDK，官方例程，模板，帮助开发(Da14580SDK, official routines, templates)
实验12 OLED显示实验
- 硬件资源: 1,DS0(连接在PF9) 2,串口1(波特率:115200,PA9/PA10连接在板载USB转串口芯片CH340上面) 3,ALIENTEK 2.8/3.5/4.3/7寸TFTLCD模块(通过FSMC驱动,FSMC_NE4接LCD片选/A6接RS) 4,按键KEY0(PE4)/KEY1(PE3) 5,24C02(IIC连接在PB8/PB9上面) 实验现象: 本实验通过KEY1按键来控制24C02的写入，通过另外一个按键KEY0来控制24C02的读取
USB_D12_C6000
- 基于PDIUSBD12的USB开发，在TI的TMS320C6000系列DSP上开发，绝对能用..经过板级验证-The USB development based PDIUSBD12, carry out in TMS320C6000 seris DSP
ICCard3
- IC卡的充值，注销，办卡，修改信息等，适合初学者下载学习-IC card recharge, log off, do cards, modify information
kXCOS7620A
- 协成固件源代码7620A源代码，可以直接进行二次开发-Hiap Seng 7620A firmware source code source code, you can direct the second development