资源列表
Software
- 12缸大功率发动机的控制器程序，PCB文件，原理图(12 cylinder high power engine controller program, PCB file, schematic diagram)
产生正弦信号
- 产生正弦信号并使用LCD显示。。。。。。。。。。(Generating sinusoidal signal)
STM32+OLED
- STM32+OLED 模拟SPI 控制 可显示数字 字符 汉字 图案 工程源文件+源码
PD78F0881
- 8位NEC单片机，两路串口，一路can总线接口，性能非常稳定，价格在25左右-NEC 8-bit microcontroller, two serial ports, all the way can bus interface, the performance is very stable, the price is about 25
Luminary_Lwip_FreeRTOS_forKeil
- 在luminary平台下移植lwip到freertos,集成开发环境KEIL,porting lwip to FreeRTOS under luminary platform , IDE is KEIL
FDWT
- it explains the ID DWT concepts. and the codes are in VHDL and MATLAB
IAR+STM8L151_CodePrj_20171104
- IAR+STM8L151工程模板代码： 1、在IAR中建立STM8工程步骤详细说明，详见压缩包文档《在IAR中建立STM8工程步骤2017-8-10 163427.docx》； 2、重定向printf()gechar()到USART3； 3、采用STM8L151标准库文件V1.6.1。(IAR+STM8L151 engineering code: 1, the establishment of STM8 engineering steps in IAR detailed instructions
stm32L151-project
- stm32L151单片机工程，同上位机通信，LORA通信 。可和上传的VS工程COM&&LOCK配套使用。(A stm32L151 project, have function of communication with PC seriaport and LORA module)
ucos_vc
- ucos是一个非常优秀的嵌入式操作系统，但作者只提供了bc下测试与调试代码，非常难于调试与学习，特别是初学者。vc是windows下非常优秀的IDE,如果把ucos移植到vc下运行，将非常方便ucos的调试与学习，有利于于ucos的推广。此项目的目的是希望能够把ucos及其相关的文件系统ucfs，GUI界面ucgui，网络tcp/ip都移植过来，方便广大爱好者学习。-ucos is a very good operating system, but the authors provided on
ESP8266_NONOS_SDK - mqtt
- ESP8266搭建MQTT客户端源码,可以连接MQTT云平台，并实现消息的推送与接收。(ESP8266 build MQTT client source code, you can connect to the MQTT cloud platform, and to achieve the push and receive messages.)
speed detection
- 码盘进行速度检测 can通讯 由communication控制(Velocity detection can communication communication)
MR7910
- 数位相框厂牌MARS主力IC-MR7910的FIRMWARE,SCH,DRIVER,SETUP,UNV文件，吐血奉献！-MARS Digital Photo Frame manufacturer of IC-MR7910 main FIRMWARE, SCH, DRIVER, SETUP, UNV paper, hematemesis dedication!