资源列表
emwinV5.12
- emwin强大的函数，由segger提供，移植到stm32-the emwin powerful function, segger transplanted to the STM32
uC_OS_III
- 嵌入式事实操作系统uc/os III的最新版本3-Latest version of Embedded fact that the operating system uc/os III
ADS1256模块资料-V0.3
- ADS1256资料，ADS1256例程，包括与单片机的连接说明等(DS1256 data, ADS1256 routines, including connection instructions with SCM.)
scitest
- F2808串口驱动，已经验证可以使用，使用GPIO14,15作为串口的输入输出线-F2808 serial port driver, have verified that you can use, use GPIO14, 15 as a serial input and output lines
demo_433
- STM32F103C8T6开发板，针对工作在433M赫兹的CC1101写是发送和接收程序(STM32 F103C8T6 development board, for CC 1101 writing at 433M Hz is sent and received)
hb_dspb
- dsp builder handbook
u-boot_for_blackfin
- u-boot, 支持bf533处理器，使用blackfin+uclinux的最佳选择。-u-boot support bf533 processor, Basis of Uclinux blackfin use the best choice.
ZigBee湿度自动上传
- Zigbee 温度串口自动上传，读取温度传感器，自动进行串口发送。(Zigbee temperature, automatic serial upload, read the temperature sensor, automatically send the serial port.)
fft3
- 是用verilog写的FFt源码，通过编译基本是正确，希望对大家有所帮助-Is written FFt verilog source code, compile basic right, we want to help
512点FFTVerilog实现
- 关于FFT Verilog代码实现的源代码
QQ2812
- DSP2812开发板上一系列的源程序，很有用，很全!-DSP2812 development board on a series of source program, is very useful, and very complete!
Balance Car
- 结合平衡小车之家写的平衡小车代码，可通过APP上位机控制平衡小车。(Combined with the balance of the car home to write the balance of the car code, you can control the balance of the car through the APP host.)