资源列表
dongtaisaomiao
- VHDL实现led灯的动态扫描，主要对CLK进行分频-VHDL realization led lamp dynamic scan, the main points of the CLK to the frequency
fir_pipeline_lms
- verilog语言编写LMS（最小均方误差）自适应滤波器。-verilog language LMS (least mean square error) adaptive filter.
mppt
- algorithm of tacking the maximum power of solar panel
uart_transmitter
- uart 发送程序,其中包含了发送和输出以为寄存器-uart_transmitter include bit_counter and output_shit register
pic
- pic单片机，主频4MHZ，编程实现秒表的计时功能。使用TIMER0的定时器功能。-PIC microcontroller, basic frequency 4 MHZ, programming to realize stopwatch timing function. TIMER0 use the timer function.
1602
- 对于1602液晶模块的显示功能的原理介绍-Principle introduced for the 1602 LCD display function module
3*3键盘读取 串口发送
- 3*3键盘读取 及串口发送 C语言源代码
C5081F74HC595Driver
- c0851应用74HC595驱动 数码管显示，本程序可现实三位数码管数字字母显示-c0851 application 74HC595 driver Digital display, this program can be realistic three LED alphanumeric display
TX-1C-AD-1602
- 基于TX-1C板子的AD(ADC0804)电压测量，并用液晶1602显示-Based on TX-1C board AD (ADC0804) voltage measurement, and 1602 with LCD display
AD0832.c
- 该程序为AD转换器ADC0832的程序模块-ADC0832 code
fengmingqichangge
- 该程序实现控制蜂鸣器演奏音乐,蜂鸣器的启停由指令控制。-The program to control the buzzer to play music, start and stop the buzzer controlled by instructions.
DSP2833x_CodeStartBranch
- 数字处理芯片F28335FLASH运行速度之后内部RAM5倍，实现FLASH数据转入内部RAM运行所需的DSP2833x_CodeStartBranch.asm文件-F28335 FLASH after digital processing chip running speed internal RAM 5 times ,achieve the desired internal FLASH data into RAM to run DSP2833x_CodeStartBranch.asm fil