资源列表
step_motor
- 电机转速控制, 通过开关可以控制电机的速度和设定电机的速度 然后再显示出来-the program is about the speed control of motor
ds18b20
- 主要是温度传感器ds18b20 与单片机通信的源程序-Mainly single-chip temperature sensor and communications ds18b20 source
lcdinterface_18f452
- lcd interface code for pic controllers
BIOS021
- C8051F021基础配置文件 对该型号的单片机进行了输入输出端口和时钟的配置；可以直接调用-basic configration for microcontroller C8051F021
Bintograyconverter
- Bin to gray converter Input (DATA_IN) width : 4 Enable (EN) active : high Bin to Bcd converter Input (data_in) width : 4 Output (data_out) width : 8 Enable (EN) active : high -Bin to gray converter -- Input (D
dianyabiao
- C51 单片机语言编写的电压表 电压范围为0-5V-C51 MCU Voltmeters written in the range of 0-5V voltage
PWM
- 讲述8051单片机控制PMW调整光的强度的C源程序。-PMW about 8051 to adjust the light intensity control of the C source.
Ball-machine-test
- 工厂解码器生产检测板所用的51单片机源程序-Decoder board production plant used to detect 51 single source
51-IR-decoding-Reference-Program
- 1.51单片机的红外遥控解码参考程序 2.使用外部中断0连接遥控头，接收红外遥控键值送P2口显示-51 MCU IR Remote Control decoding Reference Program
step-motor
- 本程序用于测试4相步进电机常规驱动 ，可以控制电动机正反转 -The program used to test the four-phase stepper motor conventional drive, you can control the motor reversing
CANDANCX
- 按键长短按判断的C语言程序，在网上找的有用的朋友看看学习下。-Key length by judgment of the C language program, the Internet to find useful friends look under study.
PRG-8901114012(A)
- 51系列单片机用IO口驱动ht1621段码驱动芯片的参考代码-51 series with the IO port driver ht1621 Segment driver chip reference code