资源列表
TRACe
- mrp开发 往手机里打调试信息 建议将这段代码添加到应用公用的头文件里，例如：game.h //因为每次都打开关闭文件，执行次数过多，会影响执行速度。 //宏DEBUG_ON_APP trace的时候需要开启，发布版本的时候，请关闭-mrp development debug information to the phone to play suggested to the application of this common code in header files, for exam
GSM_Test0
- Arduino test file for testing the Hilo GSM module from cooking hacks
SCM-is-the-pulse-signal-output
- 试利用T0从P1.0输出周期为1s，脉宽为20ms的正脉冲信号。已知晶振频率为6MHZ。-Test using T0 P1.0 output from the period of 1s, 20ms pulse width of positive pulse signal. Crystal frequency is known as 6MHZ.
28BYJ
- 基于单片机控制的28byj-48步进电机-Microcomputer Control 28byj-48 stepper motor
keyboard
- keyboard interfacing -keyboard interfacing
ac_volt_2
- Volt meter simple design
8KEY1
- 触摸8键电子琴，手指触摸就能弹奏音乐，包括传感器的应用-8 keys keyboard touch, finger touch can play music，including sensor applications
sccb-COMSprogr
- SCCB协议和I2C协议的区别 SCCB是简化的I2C协议，SIO-l是串行时钟输入线，SIO-O是串行双向数据线，分别相当于I2C协议的SCL和SDA。SCCB的... -SCCB protocol and I2C protocol differences SCCB is to simplify the I2C protocol, SIO-l is the serial clock input line, SIO-O is a bidirectional serial data
bianpin
- 可实现按键调节单片机输出的方波频率，可通过更改计时时间改变输出的频率范围。-realize the key regulating chip output square wave frequency, can change the time change the output frequency range.
DS18B20
- DS18B20驱动程序，测试可以实现，精度0.625-DS18B20 driver, test the accuracy of 0.625
matrix-keypad-scan
- HT66F50 4*4 矩阵键盘扫描控制LED发光程序-HT66F50 4*4 matrix keypad scan & LED flash program
mcu
- 实现0到99的动态显示，P1为段选，P3.6,P3.7为位选-Realize the dynamic display of the 0 to 99, P1 for period of choose, P3.6, P3.7 for a pick