资源列表
TFT.rar
- 基于FPGA的实验。使用FPGA直接控制TFT彩屏，达到显示彩条的效果。使用FPGA连接TFT控制器，使显示一组汉字或一幅图像。 ,FPGA-based experiment. FPGA to directly control the use of TFT color display to show the effect of color. TFT controller using FPGA connected to a group of Chinese characters displaye
parrel_to_serial
- S2p源可以用于实现相关的数据,但不能达到草湖北县外操作-S2p source can be used to implement the relevant data, but cannot achieve grass hubei outside the county operation
C51_LCD1602
- AT89C51/52单片机驱动字符液晶屏LCD1602的程序，已经封装好，直接在工程中添加LCD1602.C文件，并且在主函数中#include LCD1602.H-AT89C51/52 Microprocessor character LCD LCD1602 procedures are packaged well, directly in the project to add LCD1602.C file, and in the main function# include LCD1602.
FIR_LP
- 简单FIR低通滤波器 ， 阶数6阶，采样频率100KHZ ， 载频10KHz-FIR Filter
74hc166
- stc11f16xe与74HC166的通讯-stc11f16xe communication with 74HC166
Dig-scan
- 数码管动态扫描，应用于AT80C51单片机。-Digital control of dynamic scanning, used in the AT80C51.
test
- AVR单片机的定时器中断程序，用来控制数码管显示数字，可以在ICC软件中编译通过。现在到AT16单片机中运行-The timer interrupt program of the AVR microcontroller used to control digital display digital, you can compile in the ICC software through. Now run to the AT16 microcontroller
msp430g2xx3_ta_02
- MSP430定时器实验，当定时时间到达时，指示灯改变状态，实现闪烁效果。-Descr iption: Toggle P1.0 using software and TA_0 ISR. Timer_A is configured for up mode, thus the timer overflows when TAR counts to CCR0.In this example CCR0 is loaded with 50000. ACLK = n/a, MCLK = SMCLK = TACL
a
- p3.0-p3.4 为按键 左转 右转 前进 后退 停止。 p1.0-p1.3 步进电机1 p2.0-p2.3 步进电机2 五按键控制 ，可以不用按键，改为上位机控制。-p3.0-p3.4 for the forward and back buttons Zuozhuanyouzhuan stop. p1.0-p1.3 1 p2.0-p2.3 stepper motor stepper motor two five control buttons, you can
18B20
- 数字温度传感器模块化程序，用于单片机开发的主程序调用。-18B20 unit
test
- ALIENTEK MINISTM32 experiment experiment 39 ucGUI
tlv5616
- tlv5616,程序注释清楚，可以直接调用，简单明了，谁用谁知道program of tlc2543, you can use it derectly-program of tlv5616, you can use it derectly