资源列表
44b0UARTtest
- 三星44B0开发板串口输入输出测试程序源码-Samsung 44B0 Development Board serial input and output test procedures FOSS
1147464008
- USB Serial Port Emulation Example compiled on DK3420 USB uPSD3400 USB Disk Demo with Keil uVision - Beta Version -USB Serial Port Example compile Emulation d on DK3420 USB uPSD3400 USB Disk Demo with Keil u Vision-Beta Version
44b0IICtest
- FS44B0X板的IIC程序测试-------源代码-FS44B0X plate IIC test procedures ------- source code
44b0LEDtest
- 三星44b0的测试程序，运行后，三个LED在闪，因为程序没有初始化串口，所以运行后超级终端没有反应-Samsung 44b0 testing procedures, operation, the three LED flash, initialization procedure because no serial port, run after the Super Terminal no response
u-boot-1.0.0
- uboot for at91rm9200dk，可以直接使用的，已经移植好的。-uboot for at91rm9200dk, can be directly used in transplantation has been good.
ld2440a_16_rev03_040330(16-bit_NAND_Boot_Loader_So
- s3c2440 nand 启动代码（16位方式）-s3c2440 nand bootcode (16 way)
2410hardware-test
- s3c2410开发板完整的硬件测试程序，在ads1.2下调试通过-s3c2410 Development Board complete hardware testing procedures under the debugging through ads1.2
s3c2440_vivi_y2.0.tar
- s3c2440 bootloader 源码，支持nand flash 启动，支持串口升级。-s3c2440 Bootloader source support nand flash activated Serial support escalation.
linuxdevicedriver3example
- linux设备驱动第三版上的例子源码，已经调试通过的-third edition of Linux Device Drivers on the example source code, debugging has been adopted by the
NET_U
- 基于周立功m2020-NU201+ASD1.2编写； 通过网络访问插入板中的U盘上指定文件-who m2020 - NU201 ASD1.2 prepared; visit inserted through the network of U plate on the designated site
FirmwareKeiUsbl
- 一个用来实现单片机USB接口的程序，可以用来扩展老式设备的接口，适应于新的使用要求。-used to achieve a USB MCU procedure can be used to expand the old equipment interface, adapt to the new requirement.
rd_wr_k9f5608
- C51读写K9F5608源程序，自动判别坏块并跳过。-C51 literacy K9F5608 source, automatic bad block and discriminant skip.