资源列表
dff_UDP
- verilog实现，UDP描述带有异步复位的正边沿触发D触发器，test测试通过-verilog achieve, UDP asynchronous reset with a descr iption of the fringe is triggered D flip-flop, test test pass
dirital_clock_7
- verilog实现电子时钟模块，输入60Hz时钟信号和复位，输出时分秒，共6位，每位7段输出用于驱动-verilog electronic clock module, 60Hz input clock signal and reset, Minutes exportation, a total of six, each of the seven drivers for output
16bit_booth_multiplier_STG
- verilog程序，实现两个16bit数乘法，采用booth算法，基于状态机实现，分层次为datapath和controller两个子模块，testBench测试通过-verilog procedures, two 16bit multiplication, the algorithm used booth. Based on the state machine achieved at different levels for datapath controller and two sub-mo
comin
- LPC串口初始化源代码,含发送接收和中断处理程序-LPC serial port initialization source code, including receiving and sending interrupt handling procedures
irlmp
- 标准红外通信LMP源代码,红外通信协议栈的一部分,适用于标准红外通信协议-infrared communication standards LMP source code and infrared communication protocol stack part of the standard applicable to infrared communication protocol
ircomm_lmp
- 红外LMP层源代码,红外协议栈的一部分,适用于标准红外通信协议-LMP-infrared source code, infrared protocol stack part of the standard applicable to infrared communication protocol
initsys
- ARM的系统初如化源代码,适用于LPC系列单片机-ARM system as of the beginning of the source code, apply to the LPC Series MCU
windows_CE
- windows_CE开发,不错的书,有不少驱动例子说明-windows_CE development, a good book, there are many examples to illustrate Drivers
BIOS_TEST
- 自写的ARM 2410 BIOS启动程序源代码-write ARM since 2410 BIOS boot source code
SST39VF160_Flash_Program
- SST39VF160 NOR Flash驱动 VDSP环境-SST39VF160 NOR Flash-driven environment VDSP
ADI_dct
- BF533上移植Xvid编解码中的DCT部分（AD汇编）-BF533 on the transplant Xvid codecs part of the DCT (AD compilation)
AVRusart
- avr应用有关使用注意事项如下 1 在使用例子程序之前将库文件libslavr.a 拷贝到ICCAVR 安装目录下的库文件目录中 即...\\LIB\\目录将头文件slavr.h 拷贝到头文件目录即...\\include\\目录 2 如果想使用库文件中的函数那么设置如下 1) 在文件中应使用 \"#include <slavr.h>\"包含slavr.h 头文件 2) 在工程选项中的Additional LIB 一栏中填入\"slavr\" 使用附加的libsl