资源列表
dmaSoftwareCode
- blankfin 的 dma 驱动控制代码-blankfin the dma driven control code
SJA1000自测程序
- CAN总线控制器SJA1000的自测程序，硬件是利用SJA1000tx1管脚发出接收中断-SJA1000 CAN controller of the self-rated procedures, the hardware is used to give an acceptance SJA1000tx1 pin interruption
c8051f040_can
- 这是c8051f040的CAN应用程序，实现040CAN之间的通信-CAN applications and realize the communication between 040CAN
ppp_test
- 该文件为ＵＣＯＳＩＩ下的ＴＣＰ／ＩＰ移植（二）-UCOSII for the document under the TCP / IP transplantation (2)
echotest
- 该文件是ＵＣＯＳＩＩ下的ＴＣＰ／ＩＰ移植程序（一）-UCOSII the document is under the TCP / IP transplant procedures (1)
51-ucosii
- 该程序是ucosii在５１单片机上的移置，以ＫＥＩＬ为开发环境-that the procedure was ucosii in MCS-51 shift on the home, as a development environment KEIL
HS1101
- 单片机控制湿度传感器HS1101测量系统湿度程序。精度还可以-microcontroller to control the humidity sensor HS1101 humidity measurement system procedures. Accuracy can also
U盘源码
- 基于MCU的U盘源码，实现flash的windos文件系统-based MCU U-source, the realization of flash file system windos
mobil
- 从香港精电买的mobil2006液晶块，我由汇编翻译成了keil C51的工程文件-from Varitronix bought mobil2006 LCD block, I compiled by the Keil C51 translated into works documents
SDTest
- WinCE环境下检测SD卡序列号，编程环境： eVC4.0 + PPC2003。 文件清单： newres.h ReadMe.txt Resource.h SDTest.aps SDTest.cpp SDTest.h SDTest.rc SDTest.vcc SDTest.vcl SDTest.vcp SDTestDlg.cpp SDTestDlg.h StdAfx.cpp StdAfx.h-WinCE environment Se
soft.php
- 跳转在 FPGA 上实现H.264/AVC 视频编码标准-Jump on FPGA achieve H.264/AVC Video Coding Standard
ARM_FlashDown
- 功能：将flash.bin文件写入到NOR Flash中，起始地址为0x000000，实现程序的固化。适合开发板：EasyARM2200、SmartARM2200、MagicARM2200和MagicARM2200-S-function : flash.bin documents written to the NOR Flash, initial address 0x000000 achieve the curing process. Suitable development board : E