资源列表
LPC900单片机IIC软件包 V1.2
- 周立功公司开发的LPC900单片机IIC软件包，版本是V1.2-Zhou, who developed the IIC LPC900 SCM package, version V1.2
lpc2000的uart0源代码
- 菲利普公司的ARM芯片lpc2000的uart0源代码，包括uart0的驱动和应用程序-Philips ARM chip lpc2000 uart0 the source code, uart0 including the driver and application procedures
遥控接收解码采用AT89C2051
- 遥控接收解码采用AT89C2051.rar网上下载的-remote control receiver decoder using the Internet to download the AT89C2051.rar
ucos及文件系统ucfs VC环境调试代码
- ucos是一个非常优秀的嵌入式操作系统，但作者只提供了bc下测试与调试代码，非常难于调试与学习，特别是初学者。vc是windows下非常优秀的IDE,如果把ucos移植到vc下运行，将非常方便ucos的调试与学习，有利于于ucos的推广。此项目的目的是希望能够把ucos及其相关的文件系统ucfs，GUI界面ucgui，网络tcp/ip都移植过来，方便广大爱好者学习。-CENTER is a very good embedded operating system, the author provi
uCOS&TCPIP
- 44b0上的ucos,不过网卡驱动没搞好,可以做个参考,好好学习哦
1.46PalmH323
- voip原代码,不过没有电路图,不过可以参考别人的产品自己设计,祝你好运,-voip original code, but no circuit, but others can refer to the products of its own design, I wish you good luck, huh
FlashWinCE
- 俺移植的flash播放器,在arm2410平台上,wince系统下,不过没有声音-transplant flash players, in arm2410 platform, Jack system, But nobody
汇编 时钟
- 时钟程序电子表 电子表 -procedures clock watch watch watch
philips RfCard 7.373Mhz
- 由PHILIPS LPC系列单片机完成的可以读RF卡的汇编程序,可以在C中直接调用.(用片内默认时钟:7.373MHz)-by Philips LPC series microcontroller can read the complete RF card assembler, C can be called directly. (With the default clock chip : 7.373MHz)
红外接收
- 可以接收普通红外遥控器信号的汇编程序.是MCS51单片机适用.-can receive ordinary infrared remote control signals in the compilation process. Yes MCS51 apply.
st2410_bios_i
- 关于S3C2410的BIOS源代码，这是优龙的ST2410开发板上自带的，希望对大家有所帮助-on S3C2410 BIOS source code, which is the superior-ST2410 own development board, we hope to help
Philips_915ad
- 用PHILIPS P89LPC915 完成的A/D 和 D/A转换的C源程序.-Philips P89LPC915 complete with A / D and D / A conversion of the C source.