资源列表
The-OTG-function-of-U-disk-access
- OTG功能-对U盘的访问，使用USB功能的STM32微处理器-The OTG function on the U disk access, use the USB function of the STM32 microprocessor
sensor-closeloop
- 基于DSP28335的无刷直流电机控制程序，在程序中应用到增量式PID-This is a bldcm program ,which is based on TMS320F28335
multifunction-meter
- 三相多功能电表,测量三相电压,电流,计量有功,无功电能-Three-phase multifunction meter, measuring three-phase voltage, current, measuring active and reactive power
PID
- 51单片机PID自动测速和控速源程序（应用PID算法）-51MCU PID control speed
RS485-CAN
- PIC18f系列单片机can总线和rs485通信程序，已测试通过-PIC18f series MCU can bus and rs485 communication procedures have been tested
STM32F103-USART
- STM32F103 串口通信程序，适合初学者学习，可以直接应用。-STM32F103 serial communication programs, suitable for beginners to learn, can be applied directly.
TQ2440-Template-01-led
- 基于TQ2440开发板的裸机led程序，keil4 mdk环境下实现-TQ2440 development board based on bare metal led program, under keil4 mdk environment to achieve
networking_WIFI
- stm32+sdio+wifi WIFI模块开发-stm32 sdio wifi module
SMTP_Client
- stm32平台的SMPT客户端程序，可实现单片机发送邮件功能-This program is an SMTP Client example. It shows you how to send a dynamic email to an email address. This example will configure the LAN network parameters for the evaluation board automatically if a DHCP Serve
read
- stm32的驱动红外采集器的驱动程序，不需要改动，驱动AD7792芯片驱动-The STM32 driver to drive the infrared acquisition, no need to change, drive the driver of AD7792 chip
STM32--W5500-DHCP
- 基于STM32和W5500，W5500作为DHCP客户端，路由器作为DHCP服务器，W5500发送广播包获取IP地址。-Based on STM32 and W5500, take W5500 as a DHCP client，take router as a DHCP server, router. W5500 sends a broadcast packet to obtain IP address.
PIC16F886_IIC-controller
- 本程序是基于PIC16F886内部IIC总线程序控制器来驱动24C02的源程序，能够实现任意地址内容的读写，该程序经过MPLAB调试仿真成功，文件夹中包含整个工程文件。-This procedure is based on the PIC16F886 internal IIC bus controller to drive the 24C02 source code, can be applied to any address to read and write, the program thr