资源列表
dingshizhongduanqudongchengxu
- 如上．定时器以及中断驱动程序代码：）基于Ｓ３Ｃ４４Ｂ０．希望大家喜欢：）
MPC860SCH--InitCode
- MPC860原理图，以及串口、网口、QMC等全部外设的初始化源代码，极力推荐。-MPC860 diagram, and the serial port, network I, and all other peripherals QMC initialization source code, Strongly recommended.
MPC860SARCOD1
- MPC860SAR源代码，包括头文件、汇编程序以及说明。-MPC860SAR source code, including the first document, and on the compilation process.
37
- 很不错的资料。给打大家共享-very good information. To beat up share
au1200fb
- 为AU1200芯片linux系统所设计的LCD液晶显示驱动程序-AU1200 chip for linux system designed LCD Driver
AT91RM9200-U-Boot
- AT91RM9200-U-Boot at91rm9200u-boot移植源代码，稍加修改你就可以使用。使用其他的片子的也可以参考。-AT91RM9200-U-Boot at91rm9200u-boot transplant source code, a little change you can use. The use of other films also reference.
LJD2410DVK-I_BIOS
- LJD2410DVK-I开发板BIOS引导程序-LJD2410DVK - I development board BIOS boot
lpc2119_can
- 基于LPC2119 CanBus通讯程序-based LPC2119 Canbus communication procedures
ep7312_can
- 基于EP7312 MCU和uC/OS-II的CAN BUS通讯程序-based EP7312 embedded MCU and / OS-II CAN BUS communication procedures
ep7312_ucos
- uC/OS-II在EP7312微处理器的移植源程序-Phone / OS-II in the EP7312 microprocessor transplant program
Lpc2119_Modem
- 基于LPC2119和uC/OS-II的Modem驱动源代码-based LPC2119 and embedded / OS-II Modem driver source code
0361
- NEC 78f0361 LCD 的驱动程序-NEC 78f0361 LCD Driver