资源列表
实验38 SD卡_SDIO实验
- 使用stm32f103zet6读取sd卡，并实现sd的测试工作(using stm32f103zet6 read sd to test sd. so wo can use and study sd)
Programming AT92SAM7 ARMs - Introduction
- Atmel ARM Programming
STM32L073RZ
- 串口中断接收PMS7003 颗粒sensor数据(PM2.5 detect Based STM32l073)
孵化环境温度监控
- 如果要将此应用项目移植到开发板上，只需要根据此项目的电路图修改管脚，改成我们开发板对应的管脚上。温湿度传感器使用的是DHT11，所以数据口按照原理图内接。温度传感器接口也需要修改成我们开发板对应的接口(If we want to transplant this application project to the development board, we only need to modify the pins according to the circuit diagram of this
lcd
- 嵌入式处理器接口模块设计，lcd功能调试图片显示文字显示(LCD function development in embedded development)
2，标准例程-V3.5库函数版本
- STM32寄存器版本资料，方便初学者学习(STM32 register version information for beginners to learn.)
Proyecto Empotrados
- an osciloscope based on TIVA C launchpad
K60_MPU9250_MPU6050 - DMP
- mpu6050_k60读写程序，要修改一下(Mpu6050_k60 read and write program, to modify)
GY-65气压模块发送资料
- 使用BMP085气压计进行测量高度的源代码，包含arduino，51，avr三种(Use BMP085 barometer to measure the height of the source code, including Arduino, 51, AVR three kinds.)
Test
- 74LS143与STM32F103连接，PA.0和PA.1控制A和B的收发，PB.0为时钟控制，连接clock。(The 74LS143 is connected to the STM32F103. PA.0 and PA.1 control the sending and receiving of A and B. PB.0 controls the clock and connects the clock.)
inffixed.h
- this is the svter the distint tome tine
远翔芯片做的呼吸灯
- 远翔芯片做的呼吸灯，已经测试通过，给初学者(The breathing lamp made by the far Xiang chip)