资源列表
how_to_build_cross_complier
- 再做嵌入式开发的时候，首先要建立交叉编译环境，偶是刚开始做这个项目，希望同行常作交流-doing embedded development, the first to establish cross-compiler environment, duality is just beginning the project, hope for the regular exchange of peer
gccandpatch
- gcc－2.95.3，gcc的编译器和其补丁，我有很多这种源代码glibc，binutils，ccaches等有人要的话可以发信给我-gcc - 2.95.3, the gcc compiler and its patches, I have a lot of this source code glibc, binutils, ccaches to other people so I can write to
how_to_change_the_usb_to_uart
- rs232的信息，同时还有usb转串口的一些资料，介绍了一种芯片PL2303.希望能对大家有用-RS232 information, along with usb serial switch some of the information, introduces a PL2303 chip. hope can be useful for all
arm7_led_driver
- arm7下的led驱动，还附有文档介绍，对初学arm的人是很好的参考。希望能对大家有用。-ARM7 led the drive, but also with documents, the right arm when a person is a good reference. Hope can be useful for all.
gpioAT91RM9200
- AT91RM9200的嵌入式LINUX下GPIO驱动-AT91RM9200 embedded LINUX GPIO driver
AT91RM9200tc
- AT91RM9200的定时器驱动(linux2.4内核）-AT91RM9200 timers drive (linux2.4 kernel)
MPC860_SCC_UART
- powerpc系列的一款芯片mpc860的uart驱动的源代码，看源代码前最好看一下它的datesheet要不然很难看懂-powerpc series of new chip mpc860 the UART driver source code look at the source code before the best look at the datesheet otherwise it is difficult to understand them
ARM_ov511[1].tar
- 用于ARM S3C44B0/S3C4510嵌入式系统的ov511驱动程序，在自己的uclinux系统下，完全没有问题！可用于驱动采用ov511芯片的摄像头,如网眼V2000等，其中USB芯片采用SL811hc。-S3C44B0/S3C4510 for ARM Embedded System ov511 driver, Basis in their system, no problem! Drivers can be used for the ov511 chip camera, such as
s3c2440_vivi_r2.0
- S3c2440 vivi Ver 2.0-S3c2440 anger Ver 2.0
Timer_Test
- 这是s3c3v40开发板自带的光盘定时器实验程序源代码 -development board's own CD timer experimental procedure source code
c++OS
- 用C++编写多任务操作系统，很有学习价值，希望能对大家有帮助。-C preparing multi-tasking operating system, is worth learning, we hope to help.
uClinux-cmp
- 这是一篇关于uclinux触摸屏设计的文章。-This is a touch screen on the Design Basis article.