CDN加速镜像 | 设为首页 | 加入收藏夹
当前位置: 首页 源码下载 嵌入式/单片机编程 嵌入式Linux

资源列表

« 1 2 ... 65 66 67 68 69 7071 72 73 74 75 ... 1204 »
  1. qtbook-examples

    0下载:
  2. qt的实验代码,是一本十分好的qt书的源代码,非常经典的,-qt code is a very good qt the source code, very classic, Oh
  3. 所属分类:嵌入式Linux

    • 发布日期:2008-10-13
    • 文件大小:403519
    • 提供者:liwei
  1. hh-at91rm9200-2.6(1)

    0下载:
  2. 笔者使用的是华恒公司提供的基于at91rm9200的开发板,公司提供的开发环境使用Linux内核是2.4, 交叉编译环境也比较老,由于笔者用到的驱动对2.4内核支持不好(尤其在arm上)。笔者决定自己移植2.6内核到该款开发板上,目前工作已经基本完成。 本文第一部分介绍了交叉编译环境的建立,基本内核的移植过程。其中对部分Linux源代码的修改方法虽然是适用于华恒的板,不过对其他平台也有借鉴价值。-author used the huaheng company based at91rm9200 d
  3. 所属分类:嵌入式Linux

    • 发布日期:2008-10-13
    • 文件大小:32340
    • 提供者:shixi
  1. hh-at91rm9200-2.6(2)

    0下载:
  2. 笔者使用的是华恒公司提供的基于at91rm9200的开发板,公司提供的开发环境使用Linux内核是2.4, 交叉编译环境也比较老,由于笔者用到的驱动对2.4内核支持不好(尤其在arm上)。笔者决定自己移植2.6内核到该款开发板上,目前工作已经基本完成。本部分主要介绍了jffs2文件系统的建立过程。-author used the huaheng company based at91rm9200 development boards, provide development environment
  3. 所属分类:嵌入式Linux

    • 发布日期:2008-10-13
    • 文件大小:77645
    • 提供者:shixi
  1. hh-at91rm9200-2.6(3)

    0下载:
  2. 笔者使用的是华恒公司提供的基于at91rm9200的开发板,公司提供的开发环境使用Linux内核是2.4, 交叉编译环境也比较老,由于笔者用到的驱动对2.4内核支持不好(尤其在arm上)。笔者决定自己移植2.6内核到该款开发板上,目前工作已经基本完成。 本部分介绍了几个驱动程序的移植过程,特别是显卡部分。-author used the huaheng company based at91rm9200 development boards, provide development environ
  3. 所属分类:嵌入式Linux

    • 发布日期:2008-10-13
    • 文件大小:18010
    • 提供者:shixi
  1. 2[1].11_UAR

    0下载:
  2. 2410口串口测试程序,特和大家分享,希望对大家有作用.-2410 serial testing procedures, and we especially want to share with you right role.
  3. 所属分类:嵌入式Linux

    • 发布日期:2008-10-13
    • 文件大小:335708
    • 提供者:kyly
  1. rs232-c51

    0下载:
  2. uart,mcu,linux,embedded soc-uart, mcu, linux, embedded soc
  3. 所属分类:嵌入式Linux

    • 发布日期:2008-10-13
    • 文件大小:58281
    • 提供者:hf7612
  1. yamon-0227

    0下载:
  2. amd嵌入式处理器AU1200的评估板bootloader源代码-amd AU1200 the Embedded Processor Evaluation Bootloader source code
  3. 所属分类:嵌入式Linux

    • 发布日期:2008-10-13
    • 文件大小:879994
    • 提供者:hj
  1. ov511-grab

    0下载:
  2. 这是我写的基于ov511控制芯片的usb视频代码,由于ov511不带jpeg硬件压缩,我把jpeglib移植上去,并用程序实现了压缩,可以直接编译使用-This is what I wrote on ov511 usb controller chip video code As ov511 without jpeg hardware compression, and I jpeglib transplanted successfully, and the procedures to achiev
  3. 所属分类:嵌入式Linux

    • 发布日期:2008-10-13
    • 文件大小:192062
    • 提供者:lifeng
  1. ARM9-AT91RM9200

    0下载:
  2. ARM9 at91rm9200的linux驱动程序全集!超值!-ARM9 at91rm9200 the linux driver Complete Works! BONUS!
  3. 所属分类:嵌入式Linux

    • 发布日期:2008-10-13
    • 文件大小:19157004
    • 提供者:bairg
  1. ShengBo--can

    0下载:
  2. 盛博can驱动程序功能很全,并经现场PC104产品检验。经碘-Cheng Bo can drive the whole process is very functional, and the scene by PC104 product testing. After iodine
  3. 所属分类:嵌入式Linux

    • 发布日期:2008-10-13
    • 文件大小:255232
    • 提供者:nhy
  1. minigui.example

    0下载:
  2. 嵌入式图形界面MiniGUI的示例程序9例-Embedded GUI MiniGUI examples of procedures nine cases
  3. 所属分类:嵌入式Linux

    • 发布日期:2008-10-13
    • 文件大小:406399
    • 提供者:张斌
  1. CANbusdriverforS3C2410

    0下载:
  2. CAN总线芯片MCP2510在ARM芯片S3C2410上的完整驱动程序,MCP2510通过SPI接口与S3C2410对接,在Linux2.4操作系统下实现了底层带CAN接口的智能设备与上层设备进行通讯。-MCP2510 CAN Chip Chip S3C2410 ARM in the integrity of drivers, MCP2510 through the SPI interface and S3C2410 docking, the Linux operating system und
  3. 所属分类:嵌入式Linux

    • 发布日期:2008-10-13
    • 文件大小:19086
    • 提供者:庄先生
« 1 2 ... 65 66 67 68 69 7071 72 73 74 75 ... 1204 »
搜珍网 www.dssz.com