资源列表
GNUMap
- 这篇文档介绍在Linux下用GNU工具集开发ARM程序的一个机理-This document describes the use of GNU Linux development tool set procedures for an ARM Mechanism
rt2571.1.1.0.tar
- 经过修改的在uClinux2.6上正常运行的ralink rt2571芯片组的设备驱动程序.-revised uClinux2.6 on the normal operation of the chip ralink rt2571 The device driver.
maji_camera.tar
- onmivision 摄相头模块驱动程序,blackfin 平台参考设计.-onmivision perturbation is the first module driver, blackfin platform reference design.
linux-wlan-ng-0.2.3.tar
- uClinux2.6上兼容PRISM2.0芯片组的USB设备驱动程序.-uClinux2.6 on PRISM2.0 chipset compatible with the USB driver.
LCDLoad
- Cirrus Logic公司的EP7312的LCD屏驱动，ADS编写-Cirrus Logic's EP7312 LCD screen-driven, prepared ADS
T1_Int_OK
- Cirrus Logic公司的EP7312的定时器T1的使用源码，ADS编写 -Cirrus Logic's EP7312 the timer T1 use FOSS, prepared ADS
03_rtc
- ATMEL公司的AT91RM9200的实时时钟的测试程序，armgcc编译-ATMEL AT91RM9200 the company's real-time clock testing procedures, armgcc compiler
LynxEM+_Linux_Kernel_StrongArm
- sm501-712 linux驱动源码，可以用在INTEL（MARVELL）的IXP4XX和PXA系列处理器上，该芯片支持PCI和本地总线两种方式，是嵌入式系统实现图形显示的完美选择。-sm501 - 712 linux-source-driven, can be used in Intel (MARVELL) IXP4XX and PXA series processors, The chip supports PCI local bus and the two modes is embedd
u-boot_for_blackfin
- u-boot, 支持bf533处理器，使用blackfin+uclinux的最佳选择。-u-boot support bf533 processor, Basis of Uclinux blackfin use the best choice.
keydriver
- 基于ARM9的LINUX下的按键驱动程序，代码中有详细的注释，对于在此基础之上的二次开发或者是直接调用都非常方便！-ARM9 based LINUX keys under the driver, a detailed code of the Notes for the foundation of the second development is a direct call or very convenient!
e1000
- intel E1000类型网卡驱动源代码,目前在2.4的内核下支持82573的芯片不是很好,其他都不错-intel E1000 card type driver source code, currently in the 2.4 kernel to support the 82573 chip is not very good, other are pretty good
mimo_proto
- This model is just testing an idea of MIMO, which IEEE802.11n will have. But I havo not seen the standard, I tried to make it with 11a. Actually this model would not work in real world, because the preambles were not designed to solve the