资源列表
S3C2440A_UserManual_Rev13
- S3C2440用户手册 开发必备 S3C2440用户手册 开发必备-user s manual decribe
Huidu
- linux下Qt通过opecv打开摄像头，把图像显示出来，二值化处理-Qt under linux open the camera by opencv, the image displayed, binary processing
whitebalance
- linux下摄像头图像图像处理源码，调节白平衡的3种方法，测试可用-Under linux camera image processing source code, adjust the white balance of the three methods, the test can be used
OpenCV_doc
- opencv开发时的函数说明文档，函数的使用方法和例子,使用语言主要是C和C-Function when developing opencv illustrate how the documents, functions and examples
gpio_key
- arm9系列的GPIO按键中断驱动，带中文注释，是入门的杂项设备驱动-arm9 series GPIO key interrupt-driven, with Chinese comments, miscellaneous entry device driver
UDPDemo.tar
- qt网络编程UDP协议文件传输源码，基础入门可以学习借鉴-qt file transfer protocol UDP network programming source code, can learn the basic entry
max_spi
- stm32下使用max7219驱动点阵,使用spi总线来没驱动，最后下载验证，结果很稳定。-Under the stm32 use max7219 driver lattice, the use of spi bus to not drive, download the verification, the result is stable.
sun8iw5p1.tar
- 此代码为全志R16(A33)平台，nand驱动的代码，R16源码在init.rc阶段支持nand模块加载，但需要把生成的nand.ko放入ramdisk.img中，并且能调用insmod命令插入nand模块，这样才可正常启动。-this nand driver code is based on R16 soc of allwinner. if you develop board want to support nand flash ,you can put nand.ko in RAMDISK.
MPU6050
- STM32准确采集MPU6050返回的角度值和角加速，可通过上位机显示-STM32 accurate collection MPU6050 return value of the angle and angular acceleration can be displayed through the PC
8539695426
- STM32F103编写5寸LCD显示，分辨率854*480，SD卡储存字符编码，并口模式-STM32F103 preparation of 5-inch LCD display with a resolution of 854* 480, SD card storage character encoding, parallel mode
DM9000--driver
- 网卡DM9000A的裸机驱动程序，包含简单的发送ARP包，UDP包的测试程序，适合DM9000底层驱动开发的人群-Bare metal DM9000A driver, including simple send ARP packets, UDP packet test procedures, suitable for the bottom of the dm9000 driver development population
android_kernel_compile
- android内核编译手册（图文并茂），便于初学者快速入门。-android kernel compilation manual (illustrations), for beginners to get started quickly.