资源列表
QtDekChange
- 此代码为由QT开发的界面切换，可以实现从登陆界面切换到其他界面的功能-Development of this code grounds QT interface switching, can switch from the login screen to the other interface functions
watchdog
- 嵌入式 linux 看门狗驱动测试程序-failed to translate
SQUASH-linux-flash
- 重点介绍了SQUASHFS文件系统,其编译,制作,挂载和内核修改坏块处理.因为yaffs2文件系统内核支持比较成熟,其本上只需编译即可,后面也介绍了目前较常见的几种文件系统. 关键字: squashfs linux flash 坏块处理-Highlighted SQUASHFS file system, the compilation, production, mounting and handling bad block kernel modifications. Yaffs2 file
u-boot-1.1.6_OpenJTAG
- 针对OpenJtag通用调试板的Uboot程序，可以在基于三星2440处理器的开发板上运行。-General debugging OpenJtag for Uboot board procedures, can be based on the Samsung 2440 processor to run the development board.
up-netarm-2410s_img
- 北京博创netarm-2410-s开发板自带镜像软件包，包括：flashvivi文件包、imagewrite、iw_kernel、yaffs.tar、zImage、vivi、root.cramfs文件系统-Beijing Bo netarm-2410-s development board comes with mirroring software packages, including: flashvivi, imagewrite, iw_kernel file, yaffs.tar, zIm
capwap
- 采用atheros的芯片上实现capwap-atheros and capwap
paintBtn
- QT实现的自绘按钮，比较美观,用在项目开发中可以美化整体界面，使界面更加友好-design of a drawable button by QT on linux platform
uphone
- 简单的QT演示，介绍如何在linux宿主机上进行QT编程-Simple QT demonstration, showing how the QT programming on a Linux host
OV2640-linux-driver-src
- OV2640 在 linux 下的驱动，可以成功调试出JPEG。-OV2640 driver for linux.
caculate-circle-areas
- 这个是一个计算圆面积的Qt程序只要你在Qlineedit中输入需要计算的半径长度，就可算出结果-This is a Qt program to calculate the area of a circle as long as you enter the need to calculate the length of the radius of Qlineedit in, you can calculate the results
LPC3250_u-boot-1.3.3.tar
- NXP公司的ARM9 （LPC3250）下，绝对可用的uboot 源代码。网络、sdram、flash等一切正常。而且非常可靠。u-boot 的版本号是：1.3.3 .用ARM-linux-gcc 编译。-NXP' s ARM9 (LPC3250), the absolute uboot source code available. Network, sdram, flash and all is normal. And very reliable. u-boot version number
libminigui-2.0.4-linux.tar
- minigui 2.0.4 开发库源码，适用于基于miniGUI进行嵌入式图形界面开发的朋友。-minigui 2.0.4 development source library for GUI-based development.