资源列表
usb_dev
- 最底层的usb 驱动程序, 帮助理解usb的硬件， 方便测试使用(simple usb driver,help you understand the usb protocol, insmod as linux driver)
ProgrammingEmbeddedSystems
- Programming Estem nice emebdded systems nice book
cmos摄像头
- cmos摄像头驱动,平台JZ2440,摄像头ov7670(cmos camera driver,ov7670;platform JZ2440;)
CS_Barcode2ControlSample1
- motorola 2d scanner
u-boot-1.1.6_20141118
- 本程序是u-boot的源码，它支持ECC校验和纠错功能，支持USB烧写，支持yaffs，支持烧写大于内存容量的文件系统，支持tftp，支持自己更新开机logo等特性。 注意： 本文件解压前要将.rar修改为.tar.bz2.(This program is u-boot source code. It supports ECC check and error correction, USB burn program, yaffs, tftp and automatically update st
在HI3531上移植和运行QT4.8.6
- 在海思 HI3531上移植和运行QT4.8.6的教程文档(HI3531 QT4.8.6 linux)
IOT.zh
- 百度天工物联网云平台功能说明文档，基于mqtt可以实现快速设备接入(Baidu, the Internet platform function descr iption document, based on mqtt can achieve fast device access)
linux-0.11-devel-040329
- 此文件为linux0.11内核。可编译。。。。。(This file is the linux0.11 kernel. It can be compiled.)
key_led
- arm-Linux LED显示屏程序案例，需要可留言还有很多arm7-9的开发程序(Arm-Linux LED display case program case)
BootLoader
- 自己写的BootLoader往大家参考，里面有完整的注释及说明，有需要的请下载。(BootLoader for your reference, there are complete notes and instructions, you need to download.)
stepper
- 步进电机驱动，应用直线型加减速进行速度控制，适用简单的云台运动，低速运动等场景。(The step motor is driven by a linear acceleration and deceleration speed control, which is suitable for simple motion of cloud platform, low speed motion and so on.)
y1564
- This is a y1564 project, mainly for the protocol of qt embedded interface development, fully functional.