资源列表
TCP_IP
- 适用于S3c2410开发板，实现了TCP-IP协议传输，在主机和开发板开发环境里都可以看到运行结果-or S3c2410 development board to achieve a TCP-IP protocol to transmit, the host and the development board development environment, you can see the results
leddrv
- Linux设备驱动程序 硬件平台：H9200评估板（基于AT91RM9200构建） 软件平台：Linux-2.4.19-rmk7 驱动设备：LED 作者：flyerwing 编写驱动程序 ——————————————————————————————————————— 1． 编写驱动程序源文件leddrv.c-device drivers for Linux hardware platforms : H9200 Evaluation (based on the AT91
beep
- 嵌入式linux的蜂鸣器驱动源代码，基于S3C2440的驱动-The buzzer driver embedded linux source code, based on the driver S3C2440
FFT
- 基于Altera Cyclone II 系列FPGA嵌入高性能的嵌入式IP核(Nios)处理器软核,实现了基于FFT的音频信号分析-Altera Cyclone II FPGA family based embedded high-performance embedded IP core (Nios) soft core processor to achieve a FFT-based audio signal analysis
zynq-7000
- linux3.0 device tree,包括zynq-7000,arm9,coretx-a9芯片级的所有外设驱动树，i2c,spi，dma,中断，gpio-linux3.0 device tree, including zynq-7000, arm9, all peripherals coretx-a9 chip-level drivers tree, i2c, spi, dma, interruption, gpio
thread_test
- arm linux socket 通信测试代码
19th_i2c_drv
- AT24C08 EEPROM芯片的驱动程序，和测试程序。-linux driver AT24C08
INTERRUPT
- 在JX44B0实验箱上实现功能： 按外部中断按扭，LED数码管依次在不同的段数码管上显示0～9及两个英文单词“HELLO”，“BaLL”。再按一次外部中断按扭,LED数码管灭，如此循环反复。-In JX44B0 achieve functional test case: according to the external interrupt button, LED digital tube turn in a different segment LED display 0 to 9 and
tX+RX+Xmodem
- 标准的c代码，支持Xmodem的接受和发送，支持短线重传，而且随时都可以用ESC断开。功能强大。在4510上可以直接使用。
staticram
- ARM9200在LINUX2.4.19下的SRAM K6X4008T的驱动程序,可以直接加载使用
led.tar
- s3c2410led灯驱动程序，GPB0,GPB1-s3c2410led lamp driver, GPB0, GPB1
Graphicsoperations
- 此程序是vb+mo实现图形的操作,有求交,求并,求差的功能.-This program is to achieve vb+ mo graphics operation, there is intersection, seek, and seeking poor function.