资源列表
block0-nand-boot
- pxa300芯片把boot文件并到block0里面启动的ntim和hwini示例，-pxa300 chip into the boot file and start ntim block0 inside and hwini example,
patch-cs89x0
- 针对s3c2410的cs8900a的网络驱动代码，打上这个patch就可以用了。-S3C2410 the CS8900A for the network drive code, marked with the patch can be used.
I2C
- STM32F103ZET6 i2c驱动程序 读tlc2461-STM32F103ZET6 i2c
DS18B20
- 嵌入式温度传感器ds18b20 GPIO的程序，时序的定义 -Program of the embedded temperature sensor DS18B20 GPIO, time definitionsProgram of the embedded temperature sensor DS18B20 GPIO, time definitionsProgram of the embedded temperature sensor DS18B20 GPIO, time definitions
led_driver_s3c2410
- 基于s3c2410(arm9)实验室开发板的linux 2.4.18内核的led驱动，驱动入门学习具有参考价值。-linux 2.4.18 kernel led driver for s3c2410 (arm9)
u-boot-2010.03_transplant
- 基于天嵌TQ2440开发板的u-boot-2010.03移植之Nor flash启动研究报告。-TQ2440 embedded development board based on the day of the u-boot-2010.03 transplantation Nor flash boot report.
Arm9_Ds18b20
- TQ2440 用DS18B20测温的裸机程序。内有说明文档，本人已测试成功-TQ2440 bare metal with DS18B20 measurement procedures. Has documentation, I have been tested successfully
mycp
- 基于Linux平台下的复制功能，基本实现了文件复制与目录文件复制的功能-the copying function based on the platform of Linux can realize the function of file-copy and directory file
KEY_src
- 於s3c6410上 透過SoC內建keypad硬體來做外不KEYPAD硬體掃描器-On the s3c6410 through SoC built-in keypad on the hardware to do outside the scanner hardware is not KEYPAD
kdevelop3arm-linux
- 用kdevelop3交叉编译arm-linux
QT-serial-programming.tar
- 用qt实现的串口通信，这样通过串口，两台主机就可以进行收发信息。-Use qt realization of serial communication, so that through a serial port, two hosts can undertake to send and receive messages.
qt_meter
- 发一个 嵌入式qt程序，一个仪表盘的qt实现代码-Hair embedded qt procedures, a dashboard qt implementation code