资源列表
cgi_demo
- uclinux下用cgi 实现直流电机控制，系统的远程开关机，远程系统重起，以及远程修改系统的IP，显示当前系统信息等功能。
audio
- 会议模拟过程中的混音处理部分,总共包括n+1个声源
2410_button_scan
- FS2410开发板16（4X4）键驱动程序-FS2410 development board 16 (4X4) key driver
clock
- 硬件：TQ210(S5PV210) 功能：可通过串口格式化打印时钟设置信息至PC上，并且LED1与LED2交替闪烁。-Hardware: TQ210 (S5PV210) function: to set the print format through the serial clock to the PC, and LED1 and LED2 flash alternately.
如何在嵌入式LINUX中添加设备驱动程序
- 如何在嵌入式linux中添加驱动程序,介绍了在linux中驱动程序的开发经验,并付有例程-how to add embedded linux driver, introduced in linux Driver program development experience, and pay a routine
m25p16
- m25p16 SPI flash的读写擦除等操作-m25p16 SPI flash read write erase operation
temp
- This a C code for the begineers who want to program their avr using 7 segment.-This is a C code for the begineers who want to program their avr using 7 segment.
InstallLINuxFromHardware
- 纠正网上流传的绝大多数错误的硬盘安装方法，这是本人经验的结晶，可以节省您许多时间。-To correct the vast majority of Internet spread the error of hard disk installation method, which is the crystallization of my experience, I can save you a lot of time.
pd6710
- 基于PCMCIA接口代码，主要实现读取存储卡寄存器配置，确定PC Card所需要的资源并对他进行配置。软件设计主要包括两方面，一是PCcard侧的ARM控制器对CIS的初始化程序；另一方面是PC侧的驱动程序。-Based PCMCIA interface code, main memory card reader configuration register to determine the PC Card and the resources required to configure him.
gps
- 高斯投影正反算的c程序代码，网上好多都是使用vc做的，真正用c写的就这一个
2410_button_scan
- 2410板子 16键按键驱动程序及测试程序-2410board 16-key keypad driver
clock
- 这是一个在minigui下面用高级GDI函数实现电子石英钟的代码，希望能对大家在学习minigui的程序设计过程中有所帮助！压缩包内有运行后的效果图.-This is a senior in minigui following GDI functions with electronic clock code, hoping for all of us in the learning process minigui be helpful to the design process! Compres