资源列表
gprs_test
- 嵌入式Linux GPRS模块测试，测试串口GPRS联通、拨号、短信等-Embedded Linux GPRS module test
Motor-test
- 此代码的功能是通过控制ARM处理器的输出来实现对步进电机的正反转控制-This code function is controlled by the output of the ARM processor to achieve the stepper motor reversing control
gpio
- arm2416基本输入输出接口gpio测试程序。-arm2416 gpio test programmes。
nor-driver
- 嵌入式linux下与S3C2410配合的NOR设备驱动源代程序-NOR SRC
serialTest
- 树莓派串口调试程序，可实现与单片机或者手机等通信。-te serial port testing program which can communicate with single chip machine or android cell phone.
openlhw2
- 這個opengl會產生一個八面體的角錐，透過各自按下a.w.s.d四個鍵，可以各自移動到四個方向並且作旋轉-err
led.tar.bz2
- 该文件是sbc6845单板机Linux系统的led灯的驱动源码，通过测试。-The file is sbc6845 Linux system LED driver source code, passed the test.
OV2710_720P_1080P_VGA_SETTING
- OV2710验证过的三组配置参数(SETTING)，分别输出720p，1080p，VGA-OV2710 validated three sets of configuration parameters (SETTING), respectively, output 720p, 1080p, VGA
Touch_Screen_new
- 这是一个基本的触摸屏程序，优化还需要加去噪声算法。-This is a basic Touchscreen procedures, optimizing the need to increase the noise algorithm.
lpc2103
- lpc2103串口发送数据。使用外部11.0592MHz晶振，不使用PLL，Fpclk = 1/4 Fcclk。
s3c2440_cnt
- 基于飞凌OK2440的IO arm-linux驱动及测试函数-飞凌OK2440 based on the IO arm-linux driver and test function
SystemC
- 利用SystemC 来实现2 输入与非门，运行环境是linux-Using SystemC to implement 2-input NAND gate, operating environment is linux