资源列表
keys
- 基于s3c2410平台的按键驱动程序及测试程序（带makefile）-S3c2410 platform based on key drivers and test procedures(with makefile)
mkimage
- 用来将编译生成的内核转换为bootloader支持的格式-Generated used to compile the kernel is converted to a supported format bootloader
EmbeddedSystem
- 自己曾见看到的一篇关于嵌入式Linux学习的很好的文章，拿出来分享下-Have seen see a good article to learn about embedded Linux, to share
gps
- ublox-lea5 GPS模块开发资料主要实现了经纬度的提取以及时间的采集，完成了GPS初始化的工作，这是一个独立的模块通过UART与arm通信平台是linux-the ublox-lea5 GPS module development information to achieve the latitude and longitude of the extract as well as the time of acquisition, completed initialization GPS
ble_master
- 1.BLE主控设备，发送命令； 2.命令显示和转发；-1.BLE master device，send commond； 2.display the command and resend.
audiodriver
- 嵌入式系统设计：音频驱动及应用实验源码
showkey-1.4
- showkey源码包，linux系统下检测键盘的工具，ARM平台下交叉编译成功。-showkey source packages, linux systems detect keyboard instruments, ARM cross compiler platform success.
ADS5121e_04_cpld_05_002e8142
- bdiGDB configuration file for MPC5121E-MDS board
led
- ARM7开发板测试程序，实现流水灯，继电器，蜂鸣器，数码管，按键等器件的操作-ARM7 development board testing procedures, to achieve water lamp, relay, buzzer, digital tube, keys and other devices operate
Mandelbrot-MPI
- Mandelbrot 使用 MPI 方去實做，用於linux 平台-Mandelbrot implemented by MPI in Linux enviroment
s3c2410_SST39VF1601
- 本资料是基于广州华天正科技有限公司的realarm2410开发板，对其他使用SST39VF1601的2410开发板应该也是可以支持的，我移植的U-boot 是1.1.6版 -This information is based on science and technology Co., Ltd. Guangzhou China Tengen realarm2410 development board, on the other using SST39VF1601 the 2410 develop
serial.tar
- simple serial program. Shows how to set parameters for RS232, and how to stabilish conection with a computer using minicom. Tested for ARM-linux plataform. Works fine with LPC3250 ARM processor.-simple serial program. Shows how to set parameters for