资源列表
2410iis
- 2410开发板在ADS下测试IIS的程序 运行步骤: 1 打开iis.mcp工程文件 2 运行 3 根据屏幕提示,下载pcm文件到开发板中 然后接上耳机在开发板上的spi输出端,听取 音频输出 文件说明: iis_test.c 开发板初始化文件 2410iis.c iis实验主程序文件-2410 ADS development board under test in the running IIS steps : an open iis.mcp two pro
2410iic
- 2410开发板在ADS下测试IIC的程序 运行步骤: 1 打开iic.mcp工程文件 2 运行 3 观察终端输出从eeprom中 读出的数据 文件说明: iic_test.c 开发板初始化文件 2410iic.c iic实验主程序文件-2410 ADS development board under test in the IIC running steps : an open iic.mcp engineering documents two running t
嵌入式uCLINUX及其应用开发
- 这是一个关于嵌入式uCLINUX及其应用开发的教程,和一切致力于免费软件开发运用的同仁共勉之-on embedded uCLINUX and guide the development of applications, and all committed to the use of free software development colleagues share Zhi
基于ARM的嵌入式系统设计
- 基于ARM的嵌入式系统设计,讲解的十分详细.-ARM-based embedded system design, on the very detailed.
uclinux_coldfire
- uclinux的开发教程,是学习的好帮手,可能不是很系统-Basis of Uclinux Development Guide is a good helper learning, it might not be very system
gps1.0
- 这是一个GPS接收定位的原代码,通过QT Compier进行编译,测试比较稳定,很不错的。-This is a GPS receiver position of the original code, compile QT Compier. testing is relatively stable, and very good.
uboot_nios
- Nios II的uboot bootloader程序,完全可以在Nios SDK Shell下编译。-Nios II uboot Bootloader procedures, can the Nios SDK Shell compiler.
rat-4.2.25.tar
- Linux下的voip通信終端軟件,common目綠為多媒體開發包,主要提供內存mbus,md5,hmac,網絡接口方面的函數.rat為主要的函數集.-under Linux software voip communication terminals, common green head for multimedia development kits, main memory to provide legal, md5, hmac, network interface functions. ra
uCOS-IIi2c
- 基于ucos下的I2C主设备操作。包含i2c在ucos下的驱动-based on the I2C CENTER main equipment operators. I2c included in the drive CENTER
strike_ha-0.1a.tar
- 嵌入式linux双机热备份倒换处理代码,用于提高电信或工业控制设备的稳定性,采用linux多线程设计。-embedded linux-hot backup switching handling code, used to enhance the telecommunications industry or the stability control equipment used linux multithreaded design.
Lab_Timer and Timer Signals
- The goal of this lab is (1) to under the defects of software timers, (2) to write a periodic program without timers, (3) to write a periodic program using timer Hardware:Host computer PC Software: GNU GCC -The goal of this lab is (1) to
嵌入式文件系统ucfs
- 嵌入式文件系统ucfs.zip This project should serve as an \"easy start\" with /FS. All paths are relative to the project file. You should therefore be able to copy the entire directory (including all subdirectories) to any location on your harddrive.