资源列表
UARTcode
- s3c2440通用异步触发器提供3个独立的异步串行I/O,在CPU和UART之间传输数据时UART可以产生中断或DMA请求-s3c2440 universal asynchronous trigger provides three independent asynchronous serial I/O, UART can generate an interrupt or DMA request to transfer data between the CPU and the UART
Mtester---Copy
- Auto three phase and single phase meter calibration with atuo error correction
hzdot32x32
- 主要是做falsh时会使用到的文件信息。可以下载到flash上。-Mainly do falsh will use of file information.Can download to flash.
WifiDirectAutoAccepter
- wifi direct 免除确认按钮,基于Xposed框架结构-wifi direct remove confirm click,based on xposed framework
cJSONFiles
- json解析器,可移植到linux平台,mac平台-json parser, can be ported to linux platform, mac platform
nandflash
- 硬件:TQ210(S5PV210) 功能:首先写入数据至nandflash,然后将写入的数据读出,通过串口格式化打印读取信息至PC上。-Hardware: TQ210 (S5PV210) function: first write data to nandflash, then read out the written data, print format to read the information through the serial port on your PC.
clock
- 硬件:TQ210(S5PV210) 功能:可通过串口格式化打印时钟设置信息至PC上,并且LED1与LED2交替闪烁。-Hardware: TQ210 (S5PV210) function: to set the print format through the serial clock to the PC, and LED1 and LED2 flash alternately.
printf
- 硬件:TQ210(S5PV210) 功能:可通过串口格式化打印信息至PC上。 连接好串口后,打开电源,可在PC上看到如下信息: Uart Test for printf 然后继续打印如下信息: t = 1 (0x1) t = 2 (0x2) t = 3 (0x3) ... -Hardware: TQ210 (S5PV210) function: You can print formatted information via the serial port to
uart
- 硬件:TQ210(S5PV210) 功能:设置UART0,让板子与PC串口通信。 连接好串口后,打开电源,可在串口调试软件上显示如下信息: UART Test in S5PV210 1.LED1 Toggle 2.LED2 Toggle Please 1 or 2 to Toggle the LED 按下 1 可改变LED1状态,按下 2 可改变LED2状态。-Hardware: TQ210 (S5PV210) Function: Set UART0, let the
1-led_on_c
- 硬件:TQ210(S5PV210) 功能:点亮LED灯,让LED1与LED2交替闪烁。-Hardware: TQ210 (S5PV210) Function: Lit LED lights, so that LED1 and LED2 flash alternately.
rtai-4.1
- 实时优化了Linux操作系统,版本version 4.1。支持更多的CPU和板卡。-Real-time optimization of the Linux operating system, version version 4.1. Support for more CPU and board.
myWebKit
- QtWebkit包中的主要类QWebView,我们借助这个类来渲染Url指向的网页-qt explorer for Internet