资源列表
C8051F与80C51系列单片机的不同初始化
- C8051F与80C51系列单片机的不同初始化-C8051F and 80C51 microcontroller series of different initialization
KEY_MN
- uC_OS_II_外围接口程序源代码 -uC_OS_II_ peripheral interface source code
红外源程序
- 51单片机的一段C语言源程序，为NEC的源代码，可以在你做红外通讯时作参考。-SCM section 51 C language source for NEC's source code, you can do infrared communication for reference.
rtp_rev无队列_xu_201
- 实现基于ip2022的MPEG2 TS的IP组播接收-based ip2022 MPEG2 TS receive IP Multicast
mobil
- 从香港精电买的mobil2006液晶块，我由汇编翻译成了keil C51的工程文件-from Varitronix bought mobil2006 LCD block, I compiled by the Keil C51 translated into works documents
U盘源码
- 基于MCU的U盘源码，实现flash的windos文件系统-based MCU U-source, the realization of flash file system windos
c8051f040_can
- 这是c8051f040的CAN应用程序，实现040CAN之间的通信-CAN applications and realize the communication between 040CAN
SJA1000自测程序
- CAN总线控制器SJA1000的自测程序，硬件是利用SJA1000tx1管脚发出接收中断-SJA1000 CAN controller of the self-rated procedures, the hardware is used to give an acceptance SJA1000tx1 pin interruption
doc(uCOS51移植心得等系列文档打包下载V1.0)
- doc(uCOS51移植心得等系列文档打包下载V1.0)，好东西呀！-doc (uCOS51 transplantation experience a series of packaged files downloaded V1.0), the good stuff!
C8051F040_CAN_block
- This program configures the external memory interface and CAN to receieve data in a FIFO buffer and store the data in XRAM. Meant to receive data from another CAN device.-This program configures the external memory interface and CAN to receieve data
C8051F120_ADC
- This program prints the C8051F124 die temperature out the hardware UART at 115200bps. This example uses the internal 24.5MHz oscillator multiplied by 2 using the on-chip PLL (SYSCLK = 49MHz).-This program prints the C8051F124 die temp erature out at
最新版单片机反编译软件
- 最新版单片机反编译软件，各位试试用着看。-latest version of SCM - compiler software, used to try to do.