资源列表
st2410_bios_i
- 关于S3C2410的BIOS源代码，这是优龙的ST2410开发板上自带的，希望对大家有所帮助-on S3C2410 BIOS source code, which is the superior-ST2410 own development board, we hope to help
philips RfCard 7.373Mhz
- 由PHILIPS LPC系列单片机完成的可以读RF卡的汇编程序,可以在C中直接调用.(用片内默认时钟:7.373MHz)-by Philips LPC series microcontroller can read the complete RF card assembler, C can be called directly. (With the default clock chip : 7.373MHz)
汇编 时钟
- 时钟程序电子表 电子表 -procedures clock watch watch watch
遥控接收解码采用AT89C2051
- 遥控接收解码采用AT89C2051.rar网上下载的-remote control receiver decoder using the Internet to download the AT89C2051.rar
lpc2000的uart0源代码
- 菲利普公司的ARM芯片lpc2000的uart0源代码，包括uart0的驱动和应用程序-Philips ARM chip lpc2000 uart0 the source code, uart0 including the driver and application procedures
LPC900单片机IIC软件包 V1.2
- 周立功公司开发的LPC900单片机IIC软件包，版本是V1.2-Zhou, who developed the IIC LPC900 SCM package, version V1.2
MultiTask-OS
- mcu 单片机环境的多任务操作系统的例子，由 C 语言开发，代码容量较小，4KB . 可以与 uC/OS 竞比。-mcu SCM environment to the multi-task operating system examples, from C-language development, code of smaller capacity, 4KB. with uC / OS than competing.
IRMDecode
- 红外线接收头NEC码解码程序，接收红外遥控发出的NEC码，转换程序串口数据发出-infrared receiver NEC decoding process, receiving infrared remote control codes issued by the NEC, Serial data conversion issue
KEY-89c54
- 用89c54单片机开发的32键扫描键盘程序。-89c54 MCU with 32 keys keyboard scanning procedures.
GPS_DECODE
- 51单片机的c语言GPS解码程序，把从串口收到的GPS数据解码程序经纬度数据-51 SCM c GPS language decoding procedures, Serial received from the GPS data decoding process latitude and longitude data
MX10MCU
- 8051模拟IIC总线读写24CXX原程序。-8051 IIC bus simulation literacy 2 PROM original program.
07ad11
- ICCAVR编译器下的ATmega16芯片的AD使用范例。使用C语言编写，把通过中断方式的AD采集到的值送到串口。-ICCAVR compiler under the ATmega16 chips use AD model. The use of C language, the adoption of the AD interrupt processing of value to the serial.