资源列表
C51-INT0
- C51利用定时器中断0产生方波，通过调节定时周期，可以改变方波频率-Generated by the timer interrupt 0 C51 square wave, by adjusting the time cycle, square wave frequency can be changed
DISPRAM
- 自动存包柜的几个功能模块程序。有动态、固定内容的显示，条形码的打印，LCD显示等。-Automatic deposit packet counters, function block.
adns2610interfacing
- This a source code for mouse chip ADNS2610 from Avago for interfacing with microcontrollers.-This is a source code for mouse chip ADNS2610 from Avago for interfacing with microcontrollers.
HongWaiJiShu
- 基于STC89的红外计数器，数目必须小于65535。-Based on the STC89 infrared counter, the number must be smaller than 65535.
流水灯动态显示
- 实现流水灯的功能，一次从一到七逐步显示，程序为C语言代码-Light water, once from one to seven, the program for the C language code
DELAY
- 激光检测人流量，我们用到了串口模块，还有WT5001模块，按键控制。-Stream of laser detection, we use the serial port module, and WT5001 module, key control.
led2
- c51单片机LED灯检测程序，简单易懂的LED灯闪烁程序-c51 microcontroller LED lamp test, easy to understand LED lights flashing procedure
WG_26readprg
- 韦根程序,感应卡读卡器发送来的数据通过单片机读取-wiegand program
jb35s
- 三色led通过52单片机控制显示流水，跳变，渐变效果。-Led display, jump to change, gradual.
99timer
- 实现从1加到100，精度很高，以单片机为基础，是单片机学习的好程序-From a one added to the 100, high precision, single-chip microcomputer-based, is a good program to learn microcontroller
5026
- MBI5026驱动源程序，类似于74HC595,锁存下降沿-MBI5026 driver source code, similar to the 74HC595, latched on the falling edge
123
- 4、利用模块化程序编写一个字母或数制之间的转化程序，5为主模块，调用模块1和模块7 模块1又调用模块2、3、4和6四个模块，其中： 模块2实现小写字母向大写字母的转换 模块3实现大写字母向小写字母的转换 模块4实现二进制数向十六进制数的转换 模块6实现十六进制数向二进制数的转换 模块7实现十六进制数向十进制数的转换 按“q”键退出。 -4, the use of modular programming between a letter or number