资源列表
Write_AD9851
- 用ICCAVR开发的基于ATMEGA16的程序。本程序是通过AVR控制DDS-AD9851产生100KHZ正弦波的程序。对于DDS初学者来说是非常宝贵的资源。-ICCAVR developed using procedures based on the ATMEGA16. This procedure is controlled through the AVR have a DDS-AD9851 sinusoidal 100KHZ procedures. For beginners DDS is
P1
- 最简单的单片机试验，可以通过对基本试验的操作更好的理解单片机的运行过程；-The simplest single-chip test, the basic tests can be a better understanding of the operation of the operation of single-chip microcomputer
i2c
- 单片机和cpld通信中单片机c语言的原程序代码-Single-chip and single-chip communication cpld the original c language code
demo_8_2
- 同2N分频系统设计 基于AVR ATmega16单片机 利用T/CO的自动装载特性-2N frequency with AVR ATmega16 Microcontroller based system design using T/CO characteristics of the automatic loading
ggpdaima
- 广告牌程序的全部代码，显示5的程序，可以改动8*8的点阵显示不同的汉子-Billboard program all of the code, show the 5 procedures, can be changed 8* 8 dot matrix display a different man
toulanjifen
- 这是基于单片机用C语言写的，关于投篮计分系统的程序，自己的实验成果。-This is based on microcontroller written in C language about the scoring system on the shooting procedure.It is my experimental results.
164
- 串口方式0移位寄存器方式用于I/O口的扩展 164串并转换程序,00~99循环显示-Serial shift register mode 0 mode for I/O port expansion 164 series and the conversion process, 00 to 99 cycle
PWM
- 2.单片机中的PWM 指的是此单片机有部分I/O口具有输出PWM信号的功能。 比如说部分单片机的I/O口可以输出时钟信号，时钟信号的脉宽和占空皮可调，可以根据实际需要调整寄存器位来设定。 3.基本思想就是利用单片机具有的PWM端口，在不改变PWM方波周期的前提下，通过软件的方法调整单片机的PWM控制寄存器来调整PWM的占空比，从而控制充电电流。以此来调整亮度 -basic principle refers to apply PWM port
PDPINTB_ISR
- 故障中断服务程序，当电路出现故障时，会保护电路-Fault interrupt service routine, when the circuit fails, the protection circuit
juchibo
- 基于51单片机开发板，利用PCF8591将电压值进行A/D转换，在示波器上显示锯齿波-Based on 51 MCU development board, the use of the voltage value PCF8591 A/D conversion, displayed on the oscilloscope sawtooth
hwrtc_rx8025
- 时钟芯片rx8025驱动，I2C通讯方式，-Clock chip rx8025 driver, I2C communication,
motor-control
- L298通过pwm波驱动直流电机，电机为12v或者5v，是用51单片机开发的。-L298 pwm wave driven by a DC motor, the motor for 12v or 5v, with 51 MCU development.