资源列表
key
- 单片机入门级程序，按键以及led结合的小程序，方便大家初学时使用。(The introductory program of single chip microcomputer)
TFT2.8_Show
- DMAVR-L控制2.8寸TFT彩屏显示测试程序(DMAVR-L control 2.8 inch TFT color display test program)
pwm程序
- 实现直流无刷电机PWM的调制，从而控制转速。采用C语言，基于51单片机。(Realizing the modulation of the motor PWM)
VL53L0X激光测距传感器
- 使用VL53L0X型号激光测距模块测量距离 1.2m内(Use VL53L0X model laser ranging module to measure the distance within 1.2m)
PLL
- 实现了lpc2103单片机的pll功能，通过查询方式与中断方式实现(The PLL function of LPC2103 single chip computer has been realized)
I2C
- 实现了lpc2103的iic的功能，使用片上iic控制器(The IIC function of LPC2103 is realized, and the on-chip IIC controller is used.)
GPIO
- 实现了lpc2103的gpio功能，使用寄存器控制方式(The GPIO function of LPC2103 is realized, and register control mode is used.)
EINT
- 实现了lpc2103的外部中断触发功能，为边沿沿触发的方式(The external interrupt triggering function of LPC2103 is realized, which is the way of edge edge triggering.)
24C64
- C51单片机驱动EEPROM芯片AT24C64，通过模拟IIC方式驱动。(AT24C64 driver DEMO code)
LT8900
- LT8900的驱动程序,用c51驱动LT8900系列RF无线收发芯片。(LT8900 driver demo CODE)
clock
- 在C51单片机上实现了数字钟功能，以及六种其他功能，包括日期显示、秒表、定时器、闹钟等（通过按键切换）。(The function of digital clock is realized on C51 microcontroller, and six other functions, including date display, stopwatch, timer, alarm clock and so on.)
6_PWM_LED
- Launchpad G2553开发板上P1.3接了一个按键，P1.6各接了1个绿光LED（用跳线帽连接）。 * 功能描述：按键按下的瞬间，LED亮度变化。需调用TA_PWM库函数。(P1.3 on Launchpad G2553 development board received a key, and P1.6 received 1 green light LED (connected by jumper cap). * function descr iption: L