资源列表
timed_led_blink
- 这个示例配置CPU Timer0 以500毫秒为周期以及触发GPIO3、4-This example configures CPU Timer0 for a 500 msec period, and toggles the GPIO34
i2c_eeprom
- dsp28027,通过i2c在eeprom写入1~4个字节,再从中读出。-This program will write 1-14 words to EEPROM and read them back.
cpu_timer
- 这个示例配置DSP28027CPU Timer0 1 & 2和增量,每计数一次,定时器产生一个中断。-This example configures CPU Timer0, 1, & 2 and increments,a counter each time the timer asserts an interrupt.
adc_temp_sensor
- 配置dsp28027的PLL为x12/2模式。这个是其具体的程序实现。- This example sets up the PLL in x12/2 mode.
ecap_capture_pwm
- 在ccs5.5环境下,捕获pwm,可选择上升沿与下降沿,目的:获取一定时间-In the ccs5.5 environment, capture PWM, you can choose the rising edge and the falling edge, the purpose: to obtain a certain time
4clock-and-watchdog-introduction
- 该内容详细介绍了看门狗及时钟的功能,以及寄存器的分配,并附有例程-The content and details of the watchdog function of the clock, as well as register allocation, along with routine
ipiq
- 基于CCS的DSP编程,IP-IQ谐波与无功电流检测-Based on CCS DSP programming, IP-IQ harmonic and reactive current detection
VPX6_DSP4_3_app_kh_v1_00
- 基于SYS、bios的SRIO测试doum,主要言语测试SRIO的设置、连接、通过等。-Based on SYS, bios SRIO test doum, main speech test SRIO set, connect, pass and so on.
DAC7614
- DAC7614 驱动 源代码 DAC7614 驱动 源代码-DAC7614 driver
Example_2833x_FFT
- 基于DSP开发板(TMS320F28335)的FFT例程,测试可用,管脚定义在程序内部。-Example of FFT.
W5500
- W5500.c程序,主要是W5500的底层驱动程序,spi通讯,里面程序打包好的,可直接用。-W5500.c procedures, mainly W5500 the underlying driver, spi communication, can be used directly.
W5500
- W5500.h程序,主要是W5500的底层驱动程序的头文件,配合。c文件一起使用,可直接用。-W5500.h procedures, mainly W5500 the underlying driver of the first document, with. C file used together, can be used directly.