资源列表
VMD642_led
- 通过改变 LED 灯控制寄存器的值，分别实现LED 灯一个个点亮和一个个关闭，以及每次只点亮一只。-LED lights controlled by changing the value of the register, respectively, to achieve LED lights lit one and one closed, and only lit each one.
VMD642_uartio
- 用开发板随带的串口线将DSP 开发板的串口和计算机串口连接好，启动串口调试器.exe，设置串口参数，然后打开串口，就可以在发送窗口发送字符，同时在接收窗口接收DSP端传回的数据。-Development board comes with a serial cable to the serial port and DSP development board connected computer serial port, serial port debugger start .exe, set th
VMD642_audio
- 音频的测试，包括 DM642 的McASP 设置，AIC23 芯片设置，以及音频数据的交换。-Audio tests, including the exchange of DM642 McASP settings, AIC23 chip set, and audio data.
VMD642_net
- 示范如何配置和使用 EMAC 和MDIO，如何设置一个PHY 设备，以及CSL中关于网络接口部分程序的应用,采用自闭环的方式，自己向自己循环发送数据。-Demonstrate how to configure and use EMAC and MDIO, how to set up a PHY device, and the application of CSL on the network interface of the program, using a self-closed-loop a
VMD642_CPLD
- 使用 CPLD 实现辅助译码、LED 指示灯控制、看门狗等各种逻辑控制电路-Use CPLD realize assisted decoding, LED indicator control, watchdog, and other logic control circuit
DHT11
- 测温系统可以实现监测温度，显示温度，当温度过高时报警的功能。-Temperature measurement system can monitor temperature, temperature display function alarm when the temperature is too high.
TMS320C6748_GPIO
- 浮点型DSP TMS320C6748的GPIO简单操作-A C6748 GPIO demo
TMS320C6748_Interrupt
- 浮点型DSP TMS320C6748 外部中断例子-TMS320C6748 a interrupt demo
eXperimenter_files_CCSv4
- OMAP eXperimenter development support files
BLDC_contorl_2812
- TMS320F2812 BLDC驱动程序-TMS320F2812 BLDC drive
BLDC_contorl_2812_closeloop
- TMS320F2812 BLDC closeloop drive
ad
- 一个TMS320F2812模数转换模块的程序-A code of ADC mode for TMS320F2812