资源列表
2.CpuTimer2
- 利用DSP内部定时器2实现LED交替闪烁，8个发光二极管奇偶交替闪烁- implementation of DSP internal timer2 LED alternately flashes eight LEDs flash alternately parity
1.CpuTimer0
- 利用DSP内部定时器0实现流水灯，8个发光二极管以流水灯形式往复闪烁。-Use DSP internal timer 0 to achieve water lights, eight light-emitting diodes in the form of water lights flicker back and forth.
28335_AD7656
- 在ccs环境下通过TMS320F28335 SPI端口连接AD7656芯片进行数据采集的程序。-Under ccs environment TMS320F28335 data collection procedures through the AD7656 chip
DSP-1603
- 实现DSP和1603显示屏的通信和显示，完成DSP的简单开发。-Implement DSP and communications and display screen 1603, developed the DSP simple.
Fir
- 本代码用于设计FIR滤波器，利用DSP2812控制生成FIR滤波器,-The code for designing FIR filter, use DSP2812 control generates FIR filters,
timer
- 代码实现对DSP2812定时器的操作控制，有助于加深对于定时器设置的理解-Code of DSP2812 timer operation control, help to deepen understanding of the timer
Memory
- 主要实现对DSP寄存器存储器的操作，通过代码可直观的看出寄存器状态等信息-The main achievement of DSP register memory operation, can directly see the status and other information through the code register
led
- 本代码由DSP单片机控制LED灯，实现跑马灯的设计-The code consists of DSP microprocessor controlled LED lights, designed to achieve Marquee
DSPBIOS--Summarize
- DSP 的一种实时操作系统BIOS，这个文档讲述的是BIOS的原理和机制。-A real-time operating system DSP BIOS, this document is about the principle and mechanism of the BIOS.
EMIFA_FPGA
- DSP和FPGA通过EMIFA接口通信,通过串口打印数据来观察，DSP向FPGA中写入数据，FPGA接收数据后加1，DSP读取处理后的数据并通过串口打印显示-DSP and FPGA interface communication via EMIFA, print data through the serial port to observe, write data to the FPGA, DSP, FPGA after receiving data plus 1, the data read
USART--SCI
- TMS28035的SCI （UART）发送与接收，将接收的数据返回，-TMS28035 SCI
epwm_comp
- 说明 环境：DSP28035 输入：13脚COMP1A 输出：55,56 EPWM1A EPWM1B 根据外部输入的电压和内部设定的比较值进行比较，经内部处理后输出不同占空比的PWM波，两路互补。-Based on DSP28035 About epwm and comp output