资源列表
Uip1.0_LPC23XX
- 基于UCOS的UIP源代码。提供TCPIP协议栈的操作系统。-UCOS of UIP based source code. TCPIP protocol stack provides the operating system.
FCOM
- 电力行业断路器DTL645规约，行业规约上位机软件，可以对断路器设置参数、下发分合闸命令等操作。-Power Industry breaker DTL645 statute, the statute PC software industry, you can set the parameters of the circuit breaker, issued close orders and other operations.
flashmagic5
- 基于STM32、NXP的M3内核的单片机在线ISP下载程序的软件。通过串口下载程序。波特率可选。-Software-based STM32, NXP s M3 microcontroller core ISP online download program. Download the program via the serial port. Baud rate.
cc1110-12232
- cc1110写12232液晶显示，无线收发，通过串口把十位的字符写到发射机上，再发送到接收机，显示到液晶屏上。使用iar编写生成hex。-CC1110 write 12232 LCD, wireless transceiver, through the serial port to send the ten characters to the transmitter, then send to the receiver, displayed on the LCD screen. Use IAR
Internet-Time-Check
- 江苏新终端断电后，数据项和相关参数就会变得混乱。导致程序运行不正常。本操作为了节约电池掉电后数据丢失的情况。-Jiangsu New terminal after power failure, data entry and related parameters will become confused. Cause the program to run properly. The operation to save the battery power-down data is lost.
Four-axis-aircraft-source
- 基于STM32和MPU6050的四轴飞行器-Based on the STM32 and MPU6050 four axis aircraft
Capture-four-PWM
- 在同一块开发板上同时输出四路PWM波，并捕获，然后把参数显示到LCD上-Four road on the same piece of development board at the same time the output PWM wave, and capture, then the parameter display on the LCD
signal-generator
- 通过STM32控制AD9833芯片，实现利用按键切换正弦波、方波、三角波三种波形并控制频率10hz或20hz步进，全部有LCD显示。并可用蓝牙串口设置任意波形和频率-By STM32 AD9833 chip control, using the key switch sine wave, square wave, triangle wave frequencies, which are three kinds of waveform control 10 hz or 20 hz step, al
gsm
- GSM MESS SEND USING 8051 microcontroller
LEDdiaznhenxianshichengxu
- LED16*64点阵显示的文字方案，包括显示上，下，左，右，快门式，在快门式-LED16* 64 dot matrix display text program, including the display up, down, left and right, the shutter-style, under the shutter type
NOKIA1616LCD_LIB_06_03_15
- Nokia 1616 display driver
3-NewMsg-RF903
- rf903无线收发，基于51单片机，利用rf903模块进行温度的发送和温度接收和显示-Rf903 wireless transceiver, based on 51 single-chip microcomputer, the use of rf903 module temperature and temperature received and displayed