资源列表
xhcd
- 由8031内部定时器1按方式1工作，即作为16位定时器使用，每0.1秒钟T1溢出中断一次。P1口的P1.0～P1.7分别接发光二极管的L1～L8。要求编写程序模拟一循环彩灯。彩灯变化花样可自行设计。例程给出的变化花样为：①L1、L2、…L8依次点亮；②L1、L2、…L8依次熄灭；③L1、L2、…L8全亮、全灭。各时序间隔为0.5秒。让发光二极管按以上规律循环显示下去。-By 8031 according to an internal timer means a work, that is, as
077
- 设计介绍 波形发生器是用来产生一种或多种特定波形的装置，这些波形通常有正弦波.方波.三角波.锯齿波，等等。-Design Introduction waveform generator is used to generate one or more device-specific waveforms, these waveforms usually have a sine wave. Square. Triangle wave. Sawtooth, and so on.
LOVE
- 用四位共阴数码管动态扫描静态显示英文字母：LOVE
Timers-and-Interrupts-Mechanism
- It contains basic codes for timers and interrupts for microcontroller Atmel ATmega16
ds1820_to_usb
- DS1820 TO USB, DS1820 TO USB-DS1820 TO USB, DS1820 TO USB, DS1820 TO USB
LEDmain0.3
- 该装置由8块LED、RS-232C等外设构成，内核为H8，具有以下功能。 通过使用RS-232、Xmodem 通讯，进行命令文件的下载功能。 通过8块LED根据命令进行各种模式的显示功能。 -The device consists of 8 LED, RS-232C and other peripheral structure, the kernel for the H8, has the following features.
ourdev_322103
- 简单描写lcdili9320的驱动代码及配置说明，仅供参考。-Simple descr iption lcdili9320 driven code and configuration instructions for reference only.
Calc8051
- here is the calculator for 8051 for timing an dboud rate genartion .. it will be very helpful for calculation
uIP_Crumb644-Net_V1.3
- The Crumb664-Net ethernet interface is based on Silcon Laboratories CP2201 10Mbit ethernet controller with integrated phy. Additionally the ethernet transformer is already integrated on Crumb644-Net, hence no high-cost RJ45 jack with integrated trans
characterr
- here is the code for character genration for lcd system based on 8051
SSD1963
- SSD1963 driver for STR9